Andrew Hewus Fresh

I believe that the GitHub::Create Plugin needs a BeforeMint check and GitHub::Update needs a BeforeRelease check that the authentication to GitHub works. Similar to what the [Git::Push Plugin does](https://github.com/karenetheridge/Dist-Zilla-Plugin-Git/blob/master/lib/Dist/Zilla/Plugin/Git/Push.pm#L54) to...

OpenBSD should be 🐡 U+1F421 Blowfish

I've been trying to figure out how to move forward on this, but need some additional guidance. The biggest is that you say it already supports file uploads, but I...

Easiest might be IRC as I'm there (afresh1 on Freenode and irc.perl.org), although perhaps I should try going through the setup and get it running to understand how it's expected...

I can reproduce something very similar with Luban 4.1.4 on Windows 10. If I have "Normal Quality" Printing Settings selected or choose "Normal Quality" after opening Luban and do not...

I tried this on my -current sparc64 with both `-Dcc=clang` and `-Dcc=gcc.` I did not see this failure in either case. Let me know if you need me to try...

> > I tried this on my -current sparc64 with both `-Dcc=clang` and `-Dcc=gcc.` I did not see this failure in either case. > > And those were configured with...

I was able to reproduce this with a very simple square exported from OpenSCAD. It seems broken both an SVG and DXF. The OpenSCAD script saw just `square(100);` and then...

I forgot to mention that this was with Luban 4.10.1 on Windows. The reason I believe this should work is when I generate an stl from an OpenSCAD file with...

Similarly, the ability to add a "pause" between toolpaths would be really useful.