acca84

Hello, I have a question concerning this arduino board Is that possible to use one of the pins to connect a ds18b20 temperature sensor ? I'd like to make a...

Any idea how to make darkice work on raspberry pi readonly filesystem ?

1

Hello I'd like to use darkice + icecast2 on a raspberry pi running Buster I'd like to make the image readonly in order to avoid image corruptions, like in this...

Where to find more informations ?

13

Hello, I'm interested in your project, but i'd like to be sure to understand some things. If i use an ESP 8266 and a Stepper motor driver (see link below),...

Problem with Mks Sgen_L V1 and TFT35

12

Hello, I have a problem for printing on Mks Sgen_L V1 with TFT35 from USB (or SD) The printer is a cartesian printer with two hotends I select my gcode,...

Save color or set default color with Mks 12864 mini

4

Hello, I have a Mks 12864 mini used with robin E3D motherboard. It works very well, i can change the color on the lcd using the LCD menu but can't...

Hello I'm using TFT35 with Mks sgen L v1.0 I'd like to know if that is possible to set some gcode lines to be executed if i click the "Stop"...

TMC2208 Heating

3

Hello I'm wiring A Mks robin nano v1.2 on Tronxy D01 printer I use TMC2208 for x, y, z and extruder axis all axis move correctly but one of the...

Compatibility question ?

1

Hello, I have a Panasonic ethereal deluxe xe ac split. I use an intesishome wifi module. I'd like to know if this esp home firmware could work with my device...

I just have ordered this board I'm planning to use it on ultimaker 2+ I'd like to know if it will work with original ulticontroller screen, SD reader and knob...

Hello, I'm trying to boot an internal image with your payload, it's pop os image If i use psxita payload it boots directly but i have no image (i have...