GEM
GEM copied to clipboard
Distortions in visual_map outputs
Hi, I see distortions in /visual_map outputs when the robot's position and orientation values change instantly. The first image below shows the state of the robot before it goes up to the step, and the second shows the state after it goes up to the step.
I think there are two different reasons for this situation:
- Calibration
- Synchronization
Do you have any suggestions to prevent or reduce this situation?
@Orhanlogoglu Hi, I see the distortions here. I guess there is something wrong with the input point cloud or pose, so could you please first check the point cloud and the pose, see if there are big noises.