X3msnake
X3msnake
The SVX format(Simple Voxels) is a voxel transmital format. It was developed to enable the upload of voxel based models to Shapeways. The design priorities are simple definition, ease of...
I have been looking for a solution to reuse the old mobile phones screens on hackerspaces and makerspaces, and the cheapest board out there is a cyclon II Do you...
The tower OpenScad configurator code was based on Temp Calibration Tower by eibwen The process was defined by miself, it is released under CC.BY feel free to reference it modify...
Here's the test I've developed for the Anycubic Photon LCD printer. https://github.com/altLab/photon-resin-calibration This is one of the steps to find the best resin settings. if you want to integrate something...
https://www.facebook.com/Photonsters/posts/932832370504077 I'm working on Version 2 of Resin Exposure Finder tool, and i am trying to make this available to as much printers as possible. Can the current firmware do...
Is there a way to use the serial port to send a sliced file to the Form1+? https://github.com/Formlabs/OpenFL/blob/master/ADVANCED.md
Is there a way to slice to a file that we can modify with OpenFL withouth having a Formlabs machine connected, or the only way to do this is with...
@NardJ Would be great if you could add the feature to accept images as a source for compiling a .photon file. Say we slice from meshmixer to bitmaps and pipe...
Greetings Master like we spoke on the FB group, it would be awsome to have the ability to set the slice height as varibale with a control similar to slic3r...
Add the ability to use a png list as the source for layers and set the retaive heights via TXT file like for the STL slicing variable height. This is...