Rairii
Rairii
> Is there a chance we will see a PPC NT USB driver someday? Soon(tm). > I'm not sure if it is relevant, but those USB-based PowerBooks are also the...
> Not really related to the issue itself, but it'd be helpful to pin this issue to the top of this repo's issue tracker, so it'd be easier to notice...
> @Wack0 About G5s and little endian, if you are willing to use PPC assembly since compilers apparently didn't care to do better, the G5 (PPC 970 family) at least...
as the bugcheck screen says, you are using the wrong drivers.img / wrong HAL. you need to use the mac99 drivers.img. OHCI driver for NT is barely started, so you'll...
This is a known issue, the nvidia modeswitching code is only working for some gpus and not all right now.
Take the new drivers from `nt\drivers.img` (by modified date) and replace the existing files in your install, use something like winimage for that.
I don't have a dual-G4 mac99 system. I want one, so I have a test system for getting SMP support working, but I don't have one yet.
Known issue, the USB stack in the ARC firmware is currently commented out due to it being broken (on lombard, first request never replies basically) (and there's no USB driver...
"the ARC firmware is incompatible with the Ultra ATA bus on the B&W G3" this is known, there's no PCI IDE drivers in the ARC firmware yet, although I don't...
Might be because of size exceeding 128GB? I know some people have had an issue with CD being device 0 and HD being device 1 though.