Traumflug
Traumflug
> casts are forbidden in preprocessor macros. By now I found out this, too, you were right. It applies if used in an #if clause. So I reviewed these two...
Do you have such a sensor for testing? I don't. While I messed with some parts of this code while writing the SPI class, all the results are best guess....
Jogging features, like Nike shoes? Sorry, no shoes in the Teacup. If you mean proper support of G0 and M220, then yes, of course. On branch _experimental_, IIRC, soon on...
If you man the upper picture, 730 ms to 890 ms, with "a bit noisy", this is the Bresenham algorithm at work. Slower axes can step in multiples of the...
[Experience report](http://forums.reprap.org/read.php?147,33082,698786#msg-698786) from the RepRap forum: > hi, i try this [branch acc_ramp_len] but now feedrate is verrry slow. it is like maximun feedrate is adjusteed very low and i...
Looks like a `(distance == 0)` with some allowance for inaccuracies of approx_distance().
Keep in mind that the speed given by F counts for X,Y, Z, A, B, C, I, J, K only, but not for the extruder axes. Having an E-only movement...
This module, and some 50 additional commits. It's solved now. Uhm. I still have no I2C device. Is it correct your display would work on a generic, ATmega based controller...
Wohoow, a pixel based display! Interesting what you managed to squeeze into this small '328.
First, thank you for sending me a display. I got it working now to some extent. I2C appears to be a bit more complicated than serial or SPI, one has...