Traumflug
Traumflug
This is a feature request. Temperature sensors becoming loose might result in a situation where the temperature readout of one of the heaters becomes unrelated to the actual temperature of...
In conjunction with http://github.com/triffid/FiveD_on_Arduino/issues#issue/5 , FiveD on Arduino could observe behaviour of the heating elements, calculate optimized parameters for the regulating algorithm and use that.
Tony Buser wrote: I used this panel mounted DC power connector on my Mendel: mouser.com (using this modified XLR bracket http://reprap.org/wiki/Mendel_Power_Bracket) in order to connect a standard 12v/5A wall wart....
With [this upstream patch](https://github.com/Traumflug/simulavr/commit/ba6f5ec10c91c9586b70b3d4dcc0424ca44bbcad) applied I experience lots of interrupt losses (time 1A going full round instead of interrupting in time) with code which is known to work fine on...
If you pull regularly, you might have noticed a new sdcard2 branch. This is for implementing handling an SD card. I reviewed and wrote the code carefully, but I have...
Storing these four 32-bit values for almost nothing always bugged me, so let's take the plunge and remove them entirely. These values were introduced together with lookahead. However, lookahead code...
This isn't an issue, more a blackboard to announce general achievements and changes.
The rules here are simple: keep fingers off branches _master_ and _experimental_ for now, but create as many own branches you feel need for. In Git parlance they're topic branches,...
I remember some discussion about them, but can't find its place any longer. Anyways. So far I picked the first commit on *less_atomics* and *less_atomics3* (appears to be the same...
Matt modified a printer for creating PCBs using the 'scratch-n-etch' method and used a modified Teacup as firmware. Let's add him as contributor so he can bring his enhancements back...