Taylor Talkington

> You do realize that Creality ships Marlin from the factory. It's their own bastardized, buggy version that's based off of an older copy of Marlin, yes.

And for more info on at least one reason *why* Marlin can't officially support the GD chips at this point: - https://github.com/MarlinFirmware/Marlin/issues/21473 - https://github.com/MarlinFirmware/Marlin/issues/23806 Most notably: > For GD chips...

Some info that may be helpful: one of my printers triggers this pretty consistently on the hotend heater. According to OctoPrint, the hotend temperature only varied from target a few...

Yes, sorry I didn't specify, that was with the default periods. I pulled this PR down and set the period to 120 seconds, reflashed, heated up the hotend and waited....

I'm happy to see this, the stations always seemed good to me but landing on a planet always felt wrong. Pioneer feels very lonely. I think this is right for...

I played with this some this evening....it's cool! It looks like the LUT isn't actually getting loaded and it's using unknown.png instead (which makes for an interesting LUT). I had...

In case anyone else wants to mess with this, unzip this into pioneer/data which will overwrite some of the files from this PR and the zip that fluffyfreak attached above:...

@fluffyfreak Thanks! My intent is that this might help get others started with this. I also created 2 test profiles, one for height and one for slope, that show how...

Here are the test profiles I created. Just replace the profile you want to test out (ie. EarthLikeHeightMapped.json) with one of the profiles (testHeight.json or testSlope.json): [test_profiles.zip](https://github.com/pioneerspacesim/pioneer/files/4869747/test_profiles.zip)

Also, I put together a page on the Wiki showing how to create some basic textures from scratch: https://pioneerwiki.com/wiki/Creating_Simple_Pattern_Textures_in_GIMP