SybexX

Do I understand correctly that you are suggesting that all the complex logic that has been introduced over the years and is constantly being improved should simply be ignored because...

Since the ESP has limited resources, the number of ROIs in connection with the size of the ROIs must be taken into account, otherwise image problems can occur. The best...

AES encryption uses too many ESP resources compared to the benefits it brings. If so, I would read the WiFi access data from the SD as normal and when a...

Your ROIs are relatively poorly aligned and quite blurry, try to correct this first. In approximately like this picture: 

If this didn't help, install this version(I added some debug output to better localize the error.), let it run for a while and put the log here (please as a...

Set the ImageQuality to 8 (the higher the value, the worse the image quality). Try using the Brightness, Contrast and Saturation parameters to see if you can increase the image...

https://github.com/jomjol/AI-on-the-edge-device/discussions/2926

It is a negative change, read value - previous value >>> 009.11 - 999.93 = -990,82 you have to set Previous Value manually 

As far as I know, nothing like this has been implemented yet, since most counters have 5 digits and it takes tens of years for a counter to overflow^^ just...

https://randomnerdtutorials.com/esp32-cam-troubleshooting-guide/