Stefal

more info in the ntrip local caster source table

1

With RTKBase 2.3.1, the local ntrip caster serve a source table with only the mountpoint. It could be nice to complete it with other informations like coordinate, rtcm version, .......

**Describe the bug** Cpu temp is too low to be right (3°C) **To Reproduce** Steps to reproduce the behavior: 1. Go to Settings page 2. Look at the cpu temperature...

Galileo not usable with F9P firmware 1.3

1

**Describe the bug** When the F9P is upgraded to the firmware v1.3, rtklib doesn't convert the galileo nav data. **To Reproduce** Steps to reproduce the behavior: 1. Open a RTKNavi...

**Describe the solution you'd like** This window should display a different message for "no update" and "no answer"

**Describe the bug** After a RTKBase update, old static files are in the end user browser cache, and some features don't work correctly. I need to find a way to...

This command could return a wrong result with a non-US bash (https://github.com/Stefal/rtkbase/blob/f53f85f828898de5b140cee4e502e359f360f7a9/tools/install.sh#L402)

Updating F9P firmware with RTKBase

1

When a new firmware is available for the gnss receiver, it could be helpful to update it from RTKBase. Problem: Currently, there is no Gnu/linux tool to flash a F9P

**Describe the bug** No cpu temp reported on the settings page **To Reproduce** Steps to reproduce the behavior: 1. Install this flashable image on a Raspberry Pi 4: https://github.com/jancelin/pi-gen_RTKbase/releases/tag/BaseGNSS-RPi-1.1.0 2....

**Describe the bug** Check if the frontend display a correct message if the `rm "${raw_file}"` failed because of a failure in the previous command.

NRCAN accept Rinex v3 files with GPS+Glonass (30s interval)