Seri
Seri
> I'm just curious if some snippets would appear to be so useful, that we would eventually like to ship pre-defined set of snippets as a part of vimium. I...
@ah- I haven't gotten anywhere with this yet, since working on svd2rust would be above my current experience with Rust. I have plans to work with the STM32f0 USB peripherals...
I'm also familiar with platforms where the recommended method for performing a software-reset was to enable the watchdog timer, then to stall until the timer overflowed. Should this action be...
@austinbes Some of the lower and middle-end AVR chips require using the Watchdog to reset: https://www.microchip.com/webdoc/AVRLibcReferenceManual/FAQ_1faq_softreset.html
One other application comes to mind: A computationally-heavy library, or one that blocks to handle communication, may hog the processor for long enough to cause a watchdog reset. In this...
@zettelmj and @ulrikandersen, I am interested in tackling this feature. How has your experience been so far, and do you have any advice for getting started? Thank you for your...
I can confirm that @lubosz's fix worked on my system as well.
Hey @Shrobo, thanks for the interest! There are a couple of root causes to the issue you mentioned. * The Wii U USB adapter polls the controller every 4ms, compared...
With this situation in mind, there are a few maintenance fixes that would need to go into place to fix this issue. * Separate the USB code into a seperate...
Personally, I use LEDScape to drive 23 separate strips from the BBB, have disabled HDMI, and don’t use any other GPIO lines.