Sectorchan

Hi, It would be great if it is possible to change the order. I've encountered the issue that the wrong download was found and the password didn't matched.

Change Request for all negativ values into positives.

2

For what reasons are the values on the entities are negativ? From my point of view, the values of the entitiy should always are positiv, even if they are consumed....

Start only with the ESP32-CAM-MB board

7

### The Feature I had on another ESP32-CAM project the issue that the board wont start due brownout detection. My current AI on the edge only runs with the ESP32-CAM-MB...

Does anyone has the OS Miner already running on this CV SoC Board? https://www.intel.com/content/dam/www/programmable/us/en/pdfs/products/devkits/altera/documents/qs_alt_cvsoc_devkit.pdf

I open from the Example menubar the CaptivePortal sample and compile it. It throws these error: c:\Users\Patri\OneDrive\Dokumente\Arduino\libraries\ESPAsyncWebServer\src\WebAuthentication.cpp: In function 'bool getMD5(uint8_t*, uint16_t, char*)': c:\Users\Patri\OneDrive\Dokumente\Arduino\libraries\ESPAsyncWebServer\src\WebAuthentication.cpp:74:3: error: 'mbedtls_md5_starts_ret' was not declared in...

Used this library with a HMc5883L board but it always shows the same. I have no option to set the i2c bus pins

It would be great if you could control GPIO from the Raspberry pi. so you are able to enable the light to see anything from the webcam

The app states that the Grocy version 4.2.0 is not supported