renesas-sean-meng

## Issue This function was deprecated and removed for 4.0.0, but some references remain (particularly in TrustZone sections of the MDF). ## Workaround Please remove any references to statusGet or...

## Issue IOPORT module stack provides XML properties to configure ELC trigger sources for unsupported ports by the MCU. ## Workaround Do not configure ELC trigger sources for ports not...

## Issue Sockets_Recv() returns error on timeout, which leads to receive failure instead of retrying. ## Workaround No workaround is available for the releases mentioned in the applies-to-* labels.

## Issue The RRS bit of DTCCCR_SEC is being disabled when DTC is opened or reconfigured, resulting in some transfers taking marginally longer to complete. During operation, DTC will read...

## Issue When building the "mbedTLS (Crypto Only)" module on RA4T1 , RA4E2, RA6E1, and RA6T3, there may be errors due to incorrectly generated mbedtls/config.h. This is because MBEDTLS ECDH...

rm_freertos_plus_tcp: FreeRTOS_IsNetworkUp returns true before DHCP finishes

1

## Issue FreeRTOS_IsNetworkUp will return true on Phy link up event. When DHCP is enabled, device won't have a valid IP address at that time, which could lead to subsequent...

What are the differences between armv8.1m libraries

2

Following up #301 with LLVM-ET-Arm-18.1.3-Linux-x86_64 Using -mcpu=cortex-m85 -mfloat-abi=hard, multilib system picks armv8.1m.main_hard_fpdp_nomve. We are not sure it is the best choice for Cotex-M85 device that has a FPU compliant with...

e-AI translator: incorrect result of fully connected operation observed when Helium (MVEI) is enabled

1

## Issue Due to the change of Helium support in CMSIS-NN 5.0 and later, when the e-AI translator generated model is built with Helium enabled, the fully connected operation result...