SMA2016a

the function SetUserDefinedName normally used to configure an empty DeviceInfo object, but in your case you are trying to set a valid info object. If you wanted to change the...

@thasnimolvs please describe your question in detail or if you already solved the issue , please close it then. as I understood your question, this is just a matter of...

will the software works fine if you restart it?

try to keep the firmware version the same. Check the firmware version of the camera : 108126 - 07 this is the latest one.

yes, some camera sensor has increment. There is a function to readout given increment camera.Height.GetIInc() something like this.

do you use ace or ace2 model? ace: if the trigger length longer than the delay you want, then the camera parameter debouncer can be used to delay the trigger....

what action is needed to get the system in a good shape after issue have occurred? 1) Restarting the app enough? 2) camera power cycle needed? 3) PC Reboot?

1) Try following code Please refer to following code https://github.com/basler/pypylon/blob/master/samples/grabmultiplecameras.py

2) Some parameter is not available on across the camera models. So you need to check with pylonviewer if the parameter available on your camera. or via SDK e.g if...

No matter to which port I connect C1 it should always be S1 : No. I would suggest you set user-defined name for each camera. Let say cam1,cam2,cam3 then open...