SMA2016a

sure, it is near to finish. Will you also send me an PN, please.

I meant private message. No problem.

The inter camera delay would be 400-600µs when you send software trigger one by one

yes, these are the samples you need. When you start your application, read out camera's clock in ticks once. Then you know the time offset between the cameras. This value...

yes, I have tested only a GigE camera, which is working.

did you install pylon SDK on your Windows machine? 

I can confirm that USB camera is working in WSL2 a2A1920-160ucBAS at full speed. 

yes, you need usb driver also in WSL and also installed following packages. apt install linux-tools-5.x.xx-xx-generic linux-tools-virtual hwdata usbutils Contact your Basler support team, they have a full instruction for...

Would post the IP address and subnetmask of the camera and network card.

The camera must be findable using unicast communication. The Subnet not mating each other. Camera: IP: 192:168:1.21:3956 Subnet mask: 255.255.255.0 Network Card: IPv4: 192.168.1.99 Subnet Mask: 255.255.255.0 or Camera: IP:...