Rob Mackie

Z-lift on "feedhold" or "pause" - lift to z-limit switch as an option, not just to a set height from current zero.

2

Ted - is still a thing that makes sense to you for the software? Either as the "way it works" or as a configurable option? If so, then over the...

Decide if we care to fix this, and then fix it in the fabmo-updater so it works on raspberry pi if needed, or eliminate the function from the config and...

Ran a gcode job with an M3 spindle did not start, bit shattered

1

Ran a cut file that was in gcode generated by carbide create. It had an m3 command. The spindle did not start. The tool came down hard and the bit...

Needs to be recreated.

WiFi resets regularly, need to identify root cause and fix

5

With our current default installs, the wifi resets periodically breaking connections to fabmo. Need to determine if it is something underlying in our raspbian config or if it is some...

A user should be able to upgrade the g2 card to the firmware that is in the software image they are using without copying that image to the machine where...