Rémi Mercier
Rémi Mercier
From the [docs](https://getfancontrol.com/docs/): ``` [...] Modern Nvidia GPUs (RTX) have a few limitation when it comes to controlling their fans from a third party application. Most notably: Minimum %: There...
Does your curve "starts" at 30%? Your curve should look like this:
55 might be too high and not the correct threshold. I believe some cards will only go back down to 0 RPM after they drop to a specific temperature after...
> even though it should not be Why is that? from [the docs](https://getfancontrol.com/docs/) ``` The auto fan curve is designed to find the lowest possible speed to sustain a desired...
Has it ever worked since V238 and ++ ? ( since the driver change )
Basically https://github.com/LibreHardwareMonitor/LibreHardwareMonitor got some radical changes due to being forced to change driver. Said new driver was jammed in there to replace all previous calls but obviously every single motherboard...
Gigabyte does weird stuff. We just added in the support for the 2nd ITE chip which isn't controlled like other chips already, but that EC stuff I haven't touched on...
Latest release does use all the advancement that were made in LHM.
Some users reported that the service used by the Gigabyte software will interfere.
Here is the latest LHM dll with debug log enabled. Take either the .net10 or 4.7 depending on your of FanControl, and swap it in. Then enable a control and...