Raychan

In case you still have the problem: https://github.com/bb-qq/r8152/issues/114#issuecomment-828359849

Which DSM version do you have? What driver version do you have? Do you also have MTU on 1500?

Then I don't understand what's wrong with my DS916 I have a lot of Tx errors and dropped on the net wed card. :( But without this 2.5gb adapter, it...

I have now tested a lot and found that it works with an old driver "r8152-braswell-2.12.0-3.spk". And I have set the MTU to 9000, as well as enabled the jumbo...

I have now done a major test with 1500 Raw photos imported into Lightroom and converted to DNG and it works. eth2 Link encap:Ethernet HWaddr A0:CE:C8:E1:E3:55 inet addr:192.168.170.1 Bcast:192.168.170.255 Mask:255.255.255.0...

I have not had any disconnects or other problems with the driver version "r8152-braswell-2.12.0-3.spk" since 28.04.21 I have now installed the latest version "r8152-braswell-2.15.0-1.spk" for testing to tell you the...

The current driver "r8152-braswell-2.15.0-1.spk" is not suitable for the DS916+. I switched back to the old driver "r8152-braswell-2.12.0-3.spk", it runs perfectly. - write speed does not go higher than 60MB/s...

no. I have DSM 6.2.4-25556

So the driver "r8152-braswell-2.15.0-1.spk" is only for DSM 7? I did not know that. I will only switch to DSM 7 when DSM 7 is final.

> DSM 7.0 IS final. > > https://www.synology.com/nl-nl/DSM70 This is the first version. I always wait for 2-3 patches. I have a productive system. Stability is important to me.