r8152 icon indicating copy to clipboard operation
r8152 copied to clipboard

Published 20 hours ago • verified publisher icon bb-qq

DS216+ instable with Club3d 2.5Gbit driver.

Open EvertKlevert opened this issue 3 years ago • 6 comments

Description of the problem

I got the driver and 2.5Gb usb interface installed and working, but it's not stable. After a few MB of file transfer, data rate goes to 0 (when using the ip from the Club3d). The regular 216+ ethernetlink functions normal. DSM sometimes removes the new 2.5Gbit interface. Can't figure out what's the problem.

Description of your products

DS216+ upgraded tot 8GB ram Intel Celeron N3050 Club3d 2.5Gbit USB Club 3D USB 3.2 Gen1 adapter type A naar 2,5 Gigabit Ethernet ST./BU. zwart, CAC-1420 (Amazon) DSM 6.2.3-25426 update #68 used driver: bb-qq 2.14.0-2 r8152-braswell-2.14.0-2.spk from https://github.com/bb-qq/r8152/releases

Description of your environment

both NAS and PC connected through a 2.5Gbit QNAP QSW-1105-5T Cat 5e PC with Realteak 2.5Gb gaming Family controller

Output of dmesg command

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.105 (root@build4) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25426 SMP Mon Dec 14 18:45:24 CST 2020 [ 0.000000] Command line: root=/dev/md0 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 DiskIdxMap=0002 acpi_enforce_resources=lax syno_castrated_xhc=0000:00:14.0@0x0c syno_hw_version=DS216+ vender_format_version=2 syno_hdd_detect=56,59,63,57 syno_hdd_enable=61,60,71,58 sn=1620NUN811304 macs=00113258afd4 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007a4befff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a4bf000-0x000000007aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007bfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007bfbf000-0x000000007bffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007bfff000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: ACPI 2.0=0x7bffe014 SMBIOS=0x7a850000 [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB) [ 0.000000] efi: mem02: type=10, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB) [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000086000) (0MB) [ 0.000000] efi: mem04: type=0, attr=0xf, range=[0x0000000000086000-0x0000000000088000) (0MB) [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000e60000) (13MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000e60000-0x00000000374d0000) (870MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x00000000374d0000-0x0000000037a60000) (5MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037a60000-0x00000000533d6000) (441MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x00000000533d6000-0x000000007127e000) (478MB) [ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000007127e000-0x000000007129e000) (0MB) [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000007129e000-0x0000000074256000) (47MB) [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000074256000-0x00000000752b0000) (16MB) [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000752b0000-0x0000000075427000) (1MB) [ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000075427000-0x00000000754bf000) (0MB) [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000754bf000-0x00000000780dc000) (44MB) [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000780dc000-0x00000000794bf000) (19MB) [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000794bf000-0x000000007a092000) (11MB) [ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x000000007a092000-0x000000007a09b000) (0MB) [ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x000000007a09b000-0x000000007a4bf000) (4MB) [ 0.000000] efi: mem21: type=5, attr=0x800000000000000f, range=[0x000000007a4bf000-0x000000007a6bf000) (2MB) [ 0.000000] efi: mem22: type=6, attr=0x800000000000000f, range=[0x000000007a6bf000-0x000000007aabf000) (4MB) [ 0.000000] efi: mem23: type=0, attr=0xf, range=[0x000000007aabf000-0x000000007aebf000) (4MB) [ 0.000000] efi: mem24: type=10, attr=0xf, range=[0x000000007aebf000-0x000000007bfbf000) (17MB) [ 0.000000] efi: mem25: type=9, attr=0xf, range=[0x000000007bfbf000-0x000000007bfff000) (0MB) [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000007bfff000-0x000000007c000000) (0MB) [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x0000000100000000-0x0000000280000000) (6144MB) [ 0.000000] efi: mem28: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ 0.000000] efi: mem29: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] efi: mem30: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Synology Inc. DS216+/Type2 - Board Product Name, BIOS M.616 3/2/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable [ 0.000000] 3 base 07D000000 mask FFF000000 uncachable [ 0.000000] 4 base 07C800000 mask FFF800000 uncachable [ 0.000000] 5 base 07C400000 mask FFFC00000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask F80000000 write-back [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x019da000, 0x019dafff] PGTABLE [ 0.000000] BRK [0x019db000, 0x019dbfff] PGTABLE [ 0.000000] BRK [0x019dc000, 0x019dcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x27fe00000-0x27fffffff] [ 0.000000] [mem 0x27fe00000-0x27fffffff] page 2M [ 0.000000] BRK [0x019dd000, 0x019ddfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x27c000000-0x27fdfffff] [ 0.000000] [mem 0x27c000000-0x27fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x27bffffff] [ 0.000000] [mem 0x200000000-0x27bffffff] page 2M [ 0.000000] BRK [0x019de000, 0x019defff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7a4befff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7a3fffff] page 2M [ 0.000000] [mem 0x7a400000-0x7a4befff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7bfff000-0x7bffffff] [ 0.000000] [mem 0x7bfff000-0x7bffffff] page 4k [ 0.000000] BRK [0x019df000, 0x019dffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x374d0000-0x37a5ffff] [ 0.000000] ACPI: RSDP 0x000000007BFFE014 00024 (v02 INSYDE) [ 0.000000] ACPI: XSDT 0x000000007BFFE120 00094 (v01 INSYDE INSYDE 00000003 01000013) [ 0.000000] ACPI: FACP 0x000000007BFFA000 0010C (v05 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000007BFE9000 0B0A1 (v02 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000007BFBB000 00040 [ 0.000000] ACPI: UEFI 0x000000007BFFD000 00236 (v01 INSYDE INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x000000007BFFB000 00042 (v01 INSYDE INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000007BFF9000 00084 (v03 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000007BFF8000 0003C (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: SLIC 0x000000007BFF7000 00176 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: WDAT 0x000000007BFF6000 001C4 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: WDRT 0x000000007BFF5000 00047 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE8000 00763 (v01 INSYDE CpuPm 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE7000 00290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE6000 0017A (v01 INSYDE ApTst 00003000 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000007BFE5000 00084 (v03 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x000000007BFE4000 00044 (v01 INSYDE INSYDE 00000002 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x000000007BFE3000 00038 (v01 INSYDE INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected] [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880277600000-ffff88027e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x27fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0006efff] [ 0.000000] node 0: [mem 0x00070000-0x00085fff] [ 0.000000] node 0: [mem 0x00100000-0x7a4befff] [ 0.000000] node 0: [mem 0x7bfff000-0x7bffffff] [ 0.000000] node 0: [mem 0x100000000-0x27fffffff] [ 0.000000] On node 0 totalpages: 2073668 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3972 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6793 pages used for memmap [ 0.000000] DMA32 zone: 496832 pages, LIFO batch:31 [ 0.000000] Normal zone: 21504 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 131 [ 0.000000] PM: Registered nosave memory: 000000000006f000 - 0000000000070000 [ 0.000000] PM: Registered nosave memory: 0000000000086000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007a4bf000 - 000000007aebf000 [ 0.000000] PM: Registered nosave memory: 000000007aebf000 - 000000007bfbf000 [ 0.000000] PM: Registered nosave memory: 000000007bfbf000 - 000000007bfff000 [ 0.000000] PM: Registered nosave memory: 000000007c000000 - 00000000e00f8000 [ 0.000000] PM: Registered nosave memory: 00000000e00f8000 - 00000000e00f9000 [ 0.000000] PM: Registered nosave memory: 00000000e00f9000 - 00000000fed01000 [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed02000 [ 0.000000] PM: Registered nosave memory: 00000000fed02000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] e820: [mem 0x7c000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88027fc00000 s76864 r8192 d21440 u524288 [ 0.000000] pcpu-alloc: s76864 r8192 d21440 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045293 [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 DiskIdxMap=0002 acpi_enforce_resources=lax syno_castrated_xhc=0000:00:14.0@0x0c syno_hw_version=DS216+ vender_format_version=2 syno_hdd_detect=56,59,63,57 syno_hdd_enable=61,60,71,58 sn=1620NUN811304 macs=00113258afd4 [ 0.000000] Internal HD num: 2 [ 0.000000] Internal netif num: 1 [ 0.000000] Support HDD Hotplug. [ 0.000000] Sata Port Map: 21 [ 0.000000] Disk Index Map: 0002 [ 0.000000] Synology Hardware Version: DS216+-j [ 0.000000] Vender format version: 2 [ 0.000000] SYNO GPIO hdd detect pin: 56 59 63 57 [ 0.000000] SYNO GPIO hdd enable pin: 61 60 71 58 [ 0.000000] Serial Number: 1620NUN811304 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8043676k/10485760k available (4872k kernel code, 2191088k absent, 250996k reserved, 3731k data, 772k init) [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration failed [ 0.002000] tsc: PIT calibration matches PMTIMER. 1 loops [ 0.003000] tsc: Detected 1599.974 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.94 BogoMIPS (lpj=1599974) [ 0.011897] pid_max: default: 32768 minimum: 301 [ 0.017106] init_memory_mapping: [mem 0x7a4bf000-0x7a6befff] [ 0.023446] [mem 0x7a4bf000-0x7a6befff] page 4k [ 0.023470] init_memory_mapping: [mem 0x7a6bf000-0x7aabefff] [ 0.029807] [mem 0x7a6bf000-0x7a7fffff] page 4k [ 0.029811] [mem 0x7a800000-0x7a9fffff] page 2M [ 0.029813] [mem 0x7aa00000-0x7aabefff] page 4k [ 0.030638] Security Framework initialized [ 0.035258] AppArmor: AppArmor initialized [ 0.039869] Mount-cache hash table entries: 256 [ 0.045230] Initializing cgroup subsys memory [ 0.050129] Initializing cgroup subsys devices [ 0.055109] Initializing cgroup subsys freezer [ 0.060087] Initializing cgroup subsys blkio [ 0.064904] CPU: Physical Processor ID: 0 [ 0.069387] CPU: Processor Core ID: 0 [ 0.073483] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.093535] mce: CPU supports 6 MCE banks [ 0.098035] CPU0: Thermal monitoring enabled (TM1) [ 0.103406] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.119165] FEATURE SPEC_CTRL Not Present [ 0.123655] FEATURE IBPB_SUPPORT Not Present [ 0.128437] Spectre V2 : Vulnerable [ 0.132463] Freeing SMP alternatives: 24k freed [ 0.137548] ACPI: Core revision 20130328 [ 0.154259] ACPI: All ACPI Tables successfully acquired [ 0.165075] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.181796] smpboot: CPU0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz (fam: 06, model: 4c, stepping: 03) [ 0.192362] TSC deadline timer enabled [ 0.192380] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. [ 0.201948] ... version: 3 [ 0.206428] ... bit width: 40 [ 0.211004] ... generic registers: 2 [ 0.215484] ... value mask: 000000ffffffffff [ 0.221419] ... max period: 000000007fffffff [ 0.227355] ... fixed-purpose events: 3 [ 0.231834] ... event mask: 0000000700000003 [ 0.238250] smpboot: Booting Node 0, Processors #1 [ 0.262310] Brought up 2 CPUs [ 0.265830] smpboot: Total of 2 processors activated (6399.89 BogoMIPS) [ 0.273696] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.283069] devtmpfs: initialized [ 0.287265] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes) [ 0.295934] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7bfbefff] (17825792 bytes) [ 0.305813] xor: measuring software checksum speed [ 0.321193] prefetch64-sse: 5624.000 MB/sec [ 0.336276] generic_sse: 4976.000 MB/sec [ 0.341048] xor: using function: prefetch64-sse (5624.000 MB/sec) [ 0.347862] pinctrl core: initialized pinctrl subsystem [ 0.353834] NET: Registered protocol family 16 [ 0.359700] ACPI: bus type PCI registered [ 0.364395] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.374807] PCI: not using MMCONFIG [ 0.378707] PCI: Using configuration type 1 for base access [ 0.395046] bio: create slab at 0 [ 0.416600] raid6: sse2x1 gen() 714 MB/s [ 0.438416] raid6: sse2x1 xor() 1712 MB/s [ 0.460245] raid6: sse2x2 gen() 1136 MB/s [ 0.482053] raid6: sse2x2 xor() 1964 MB/s [ 0.503877] raid6: sse2x4 gen() 1765 MB/s [ 0.525695] raid6: sse2x4 xor() 1833 MB/s [ 0.530468] raid6: using algorithm sse2x4 gen() (1765 MB/s) [ 0.536696] raid6: .... xor() 1833 MB/s, rmw enabled [ 0.542245] raid6: using ssse3x2 recovery algorithm [ 0.547816] ACPI: Added _OSI(Module Device) [ 0.552503] ACPI: Added _OSI(Processor Device) [ 0.557474] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.562733] ACPI: Added OSI(Processor Aggregator Device) [ 0.572124] ACPI: EC: Look up EC in DSDT [ 0.597652] ACPI: SSDT 0x000000007AEB1698 00633 (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.607946] ACPI: Dynamic OEM Table Load: [ 0.612448] ACPI: SSDT 0x0000000000000000 00633 (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.622116] ACPI: SSDT 0x000000007AEB0C18 003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.632378] ACPI: Dynamic OEM Table Load: [ 0.636872] ACPI: SSDT 0x0000000000000000 003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.652657] ACPI: SSDT 0x000000007AEB2E18 0015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.662983] ACPI: Dynamic OEM Table Load: [ 0.667483] ACPI: SSDT 0x0000000000000000 0015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.679912] ACPI: SSDT 0x000000007AEB9E18 0008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.690190] ACPI: Dynamic OEM Table Load: [ 0.694694] ACPI: SSDT 0x0000000000000000 0008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.707719] ACPI: Interpreter enabled [ 0.711842] ACPI: (supports S0 S4 S5) [ 0.715938] ACPI: Using IOAPIC for interrupt routing [ 0.721539] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.734061] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 0.744042] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.754549] ACPI: No dock devices found. [ 0.764566] ACPI: Power Resource [USBC] (on) [ 0.777282] ACPI: Power Resource [ID3C] (off) [ 0.793440] ACPI: Power Resource [FN00] (off) [ 0.799554] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.806594] _SB.PCI0:_OSC invalid UUID [ 0.806598] OSC request data:1 8 0 [ 0.806716] _SB.PCI0:_OSC invalid UUID [ 0.806720] _OSC request data:1 1f 0 [ 0.806729] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.815681] acpi PNP0A08:00: Unable to request OSC control (OSC support mask: 0x08) [ 0.824916] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0xdfffffff]; [mem 0x80000000-0xdfffffff] ignored [ 0.837470] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.849341] PCI host bridge to bus 0000:00 [ 0.853941] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.860076] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.866987] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.873891] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.880801] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.888488] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.896168] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.903855] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] [ 0.911554] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.911749] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000 [ 0.911779] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x90ffffff 64bit] [ 0.911795] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.911808] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.912119] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601 [ 0.912188] pci 0000:00:13.0: reg 20: [io 0x3060-0x307f] [ 0.912202] pci 0000:00:13.0: reg 24: [mem 0x91416000-0x914167ff] [ 0.912270] pci 0000:00:13.0: PME# supported from D3hot [ 0.912512] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.912569] pci 0000:00:14.0: reg 10: [mem 0x91400000-0x9140ffff 64bit] [ 0.912671] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.912795] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.919257] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.919286] pci 0000:00:1a.0: reg 10: [mem 0x91300000-0x913fffff] [ 0.919301] pci 0000:00:1a.0: reg 14: [mem 0x91200000-0x912fffff] [ 0.919397] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.919631] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.919743] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.919873] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.926351] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400 [ 0.926463] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.926593] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.933084] pci 0000:00:1e.0: [8086:2286] type 00 class 0x080102 [ 0.933112] pci 0000:00:1e.0: reg 10: [mem 0x91410000-0x91413fff] [ 0.933434] pci 0000:00:1e.4: [8086:228c] type 00 class 0x078000 [ 0.933463] pci 0000:00:1e.4: reg 10: [mem 0x91415000-0x91415fff] [ 0.933788] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.934167] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500 [ 0.934228] pci 0000:00:1f.3: reg 10: [mem 0x91414000-0x9141401f] [ 0.934346] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f] [ 0.934898] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.934940] pci 0000:01:00.0: reg 10: [mem 0x91100000-0x9111ffff] [ 0.934982] pci 0000:01:00.0: reg 18: [io 0x2000-0x201f] [ 0.935005] pci 0000:01:00.0: reg 1c: [mem 0x91120000-0x91123fff] [ 0.935177] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.935246] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.944610] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.950179] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.950188] pci 0000:00:1c.0: bridge window [mem 0x91100000-0x911fffff] [ 0.950363] pci 0000:02:00.0: [1b4b:9170] type 00 class 0x010601 [ 0.950386] pci 0000:02:00.0: reg 10: [io 0x1018-0x101f] [ 0.950401] pci 0000:02:00.0: reg 14: [io 0x1024-0x1027] [ 0.950416] pci 0000:02:00.0: reg 18: [io 0x1010-0x1017] [ 0.950431] pci 0000:02:00.0: reg 1c: [io 0x1020-0x1023] [ 0.950445] pci 0000:02:00.0: reg 20: [io 0x1000-0x100f] [ 0.950461] pci 0000:02:00.0: reg 24: [mem 0x91000000-0x910001ff] [ 0.950476] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.950539] pci 0000:02:00.0: PME# supported from D3hot [ 0.950584] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.958945] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.964518] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.964527] pci 0000:00:1c.2: bridge window [mem 0x91000000-0x910fffff] [ 0.964551] pci_bus 0000:00: on NUMA node 0 [ 0.966441] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.975622] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.984808] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.993999] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.003190] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.012373] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.021564] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.030745] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.040157] cherryview-pinctrl: Adding GPIO Controller - Pin ranged 0 ~ 55 [ 1.048189] cherryview-pinctrl: Adding GPIO Controller - Pin ranged 56 ~ 114 [ 1.056396] cherryview-pinctrl: Adding GPIO Controller - Pin ranged 115 ~ 138 [ 1.064696] cherryview-pinctrl: Adding GPIO Controller - Pin ranged 139 ~ 193 [ 1.073308] ACPI: Enabled 6 GPEs in block 00 to 3F [ 1.078707] acpi root: _SB.PCI0 notify handler is installed [ 1.078842] Found 1 acpi root devices [ 1.079226] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.088284] vgaarb: loaded [ 1.091326] vgaarb: bridge control possible 0000:00:02.0 [ 1.097598] SCSI subsystem initialized [ 1.101815] ACPI: bus type ATA registered [ 1.106558] libata version 3.00 loaded. [ 1.106834] pps_core: LinuxPPS API ver. 1 registered [ 1.112406] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected] [ 1.122688] PTP clock support registered [ 1.127333] EFI Variables Facility v0.08 2004-May-17 [ 1.147146] Registered efi as persistent store backend [ 1.152915] PCI: Using ACPI for IRQ routing [ 1.160230] PCI: pci_cache_line_size set to 64 bytes [ 1.160308] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 1.160313] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 1.160316] e820: reserve RAM buffer [mem 0x7a4bf000-0x7bffffff] [ 1.160910] Switching to clocksource refined-jiffies [ 1.166619] AppArmor: AppArmor Filesystem Enabled [ 1.171985] pnp: PnP ACPI init [ 1.175413] ACPI: bus type PNP registered [ 1.180036] pnp 00:00: Plug and Play ACPI device, IDs INT0800 (active) [ 1.180177] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.186807] system 00:01: [io 0x0400-0x047f] could not be reserved [ 1.193819] system 00:01: [io 0x0500-0x05fe] has been reserved [ 1.200440] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.200662] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.202989] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.203234] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.211029] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved [ 1.218420] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.225818] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.233214] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved [ 1.240612] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved [ 1.248008] system 00:04: [mem 0xfed80000-0xfedbffff] could not be reserved [ 1.255785] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.263183] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.270580] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.270915] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.271193] pnp: PnP ACPI: found 6 devices [ 1.275780] ACPI: bus type PNP unregistered [ 1.292958] Switching to clocksource acpi_pm [ 1.297760] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 1.307462] pci 0000:00:1c.2: BAR 15: assigned [mem 0x91500000-0x915fffff pref] [ 1.315649] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.321212] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.328037] pci 0000:00:1c.0: bridge window [mem 0x91100000-0x911fffff] [ 1.335645] pci 0000:02:00.0: BAR 6: assigned [mem 0x91500000-0x9150ffff pref] [ 1.343719] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 1.349277] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 1.356102] pci 0000:00:1c.2: bridge window [mem 0x91000000-0x910fffff] [ 1.363701] pci 0000:00:1c.2: bridge window [mem 0x91500000-0x915fffff pref] [ 1.372104] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 1.372110] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 1.372114] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 1.372119] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 1.372123] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 1.372127] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 1.372132] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff] [ 1.372136] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.372140] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff] [ 1.372145] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 1.372149] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff] [ 1.372153] pci_bus 0000:02: resource 2 [mem 0x91500000-0x915fffff pref] [ 1.372226] NET: Registered protocol family 2 [ 1.377490] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.386085] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.394003] TCP: Hash tables configured (established 65536 bind 65536) [ 1.401388] TCP: reno registered [ 1.405025] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.411907] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.419395] NET: Registered protocol family 1 [ 1.424472] RPC: Registered named UNIX socket transport module. [ 1.431113] RPC: Registered udp transport module. [ 1.436370] RPC: Registered tcp transport module. [ 1.441647] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.448875] pci 0000:00:02.0: Boot video device [ 1.450766] pci 0000:02:00.0: Apply mv9170 specific programming steps [ 1.457986] PCI: CLS 64 bytes, default 64 [ 1.912038] Trying to unpack rootfs image as initramfs... [ 4.284504] decompress cpio completed and skip redundant lzma [ 4.291570] Freeing initrd memory: 5696k freed [ 4.298803] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.306028] software IO TLB [mem 0x6d27e000-0x7127e000] (64MB) mapped at [ffff88006d27e000-ffff88007127dfff] [ 4.345319] Initialise module verification [ 4.350015] audit: initializing netlink socket (disabled) [ 4.356100] type=2000 audit(1617614200.929:1): initialized [ 4.372784] bounce pool size: 64 pages [ 4.382599] VFS: Disk quotas dquot_6.5.2 [ 4.387052] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.394709] NFS: Registering the id_resolver key type [ 4.400401] Key type id_resolver registered [ 4.405085] Key type id_legacy registered [ 4.409599] msgmni has been set to 15802 [ 4.414505] Key type asymmetric registered [ 4.419113] Asymmetric key parser 'x509' registered [ 4.424800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 4.433082] io scheduler noop registered [ 4.437472] io scheduler deadline registered [ 4.442273] io scheduler cfq registered (default) [ 5.317680] tsc: Refined TSC clocksource calibration: 1599.947 MHz [ 5.324638] Switching to clocksource tsc [ 6.368942] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 6.397985] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.417846] 0000:00:1e.4: ttyS1 at MMIO 0x91415000 (irq = 19) is a 16550A [ 6.621772] brd: module loaded [ 6.631707] Loading iSCSI transport class v2.0-870. [ 6.694953] ahci 0000:00:13.0: version 3.0 [ 6.695205] ahci 0000:00:13.0: irq 131 for MSI/MSI-X [ 6.695300] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 6.704369] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 6.714009] ahci 0000:00:13.0: setting latency timer to 64 [ 6.729235] scsi0 : ahci [ 6.742643] scsi1 : ahci [ 6.750395] ata1: SATA max UDMA/133 abar m2048@0x91416000 port 0x91416100 irq 131 [ 6.758793] ata2: SATA max UDMA/133 abar m2048@0x91416000 port 0x91416180 irq 131 [ 15.131322] ata1: link is slow to respond, please be patient (ready=0) [ 18.606211] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 18.613804] ata1.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133 [ 18.620731] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 18.628711] ata1.00: SN: W1F10S39 [ 18.634090] ata1.00: configured for UDMA/133 [ 18.639399] scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN166 CC4B PQ: 0 ANSI: 5 [ 18.651119] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 18.659793] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 18.667220] Delay 5 seconds to wait for disk 2 ready. [ 18.668457] sd 0:0:0:0: [sda] Write Protect is off [ 18.668462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.668513] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.713599] sda: sda1 sda2 sda5 [ 18.756254] sd 0:0:0:0: [sda] Attached SCSI disk [ 32.052756] ata2: link is slow to respond, please be patient (ready=0) [ 36.700599] ata2: COMRESET failed (errno=-16) [ 36.705474] ata2: COMRESET fail, set COMRESET fail flag [ 37.017600] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 37.024518] ata2: link reset sucessfully clear error flags [ 37.077425] ata2.00: ATA-10: ST8000DM004-2CX188, 0001, max UDMA/133 [ 37.084446] ata2.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 37.092522] ata2.00: SN: ZCT0E6CM [ 37.148152] ata2.00: configured for UDMA/133 [ 37.156096] scsi 1:0:0:0: Direct-Access ATA ST8000DM004-2CX188 0001 PQ: 0 ANSI: 5 [ 37.167815] sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB) [ 37.176585] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 37.180506] ahci 0000:02:00.0: irq 132 for MSI/MSI-X [ 37.180534] ahci 0000:02:00.0: controller can't do NCQ, turning off CAP_NCQ [ 37.180563] Change defer qc mode on external port for compatibility [ 37.180611] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 37.180617] ahci 0000:02:00.0: flags: 64bit sntf led only pmp fbs pio slum part sxs [ 37.215083] sd 1:0:0:0: [sdb] Write Protect is off [ 37.220451] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 37.220507] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.223859] scsi2 : ahci [ 37.230640] ata3: FORCE: PHY spd limit set to 3.0 Gbps [ 37.230644] ata3: SATA max UDMA/133 abar m512@0x91000000 port 0x91000100 irq 132 [ 37.306612] sdb: sdb1 sdb2 sdb5 [ 37.314119] sd 1:0:0:0: [sdb] Attached SCSI disk [ 37.535589] ata3: SATA link down (SStatus 0 SControl 320) [ 37.541642] ata3: Disk is present for SATA link down event [ 37.571130] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 38.641749] i8042: No controller found [ 38.645994] rtc_cmos 00:05: RTC can wake from S4 [ 38.651656] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 38.658543] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram [ 38.666397] i2c /dev entries driver [ 38.671930] ACPI Warning: 0x0000000000003040-0x000000000000305F SystemIO conflicts with Region _SB.PCI0.SBUS.SMBI 1 (20130328/utaddress-249) [ 38.686298] ACPI: This conflict may cause random problems and system instability [ 38.694577] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 38.712728] md: linear personality registered for level -1 [ 38.718884] md: raid0 personality registered for level 0 [ 38.724820] md: raid1 personality registered for level 1 [ 38.730769] md: raid10 personality registered for level 10 [ 38.738610] md: raid6 personality registered for level 6 [ 38.744566] md: raid5 personality registered for level 5 [ 38.750530] md: raid4 personality registered for level 4 [ 38.756703] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected] [ 38.766143] cpuidle: using governor ladder [ 38.770732] cpuidle: using governor menu [ 38.775290] TCP: cubic registered [ 38.779003] NET: Registered protocol family 17 [ 38.784019] Key type dns_resolver registered [ 38.800785] Loading module verification blacklist certificates [ 38.807329] Loading module verification certificates [ 38.812947] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 38.827236] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 38.838845] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 38.852110] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 38.863407] registered taskstats version 1 [ 38.868662] rtc_cmos 00:05: setting system clock to 2021-04-05 09:17:17 UTC (1617614237) [ 38.879131] Freeing unused kernel memory: 772k freed [ 38.884942] Write protecting the kernel read-only data: 8192k [ 38.891648] Freeing unused kernel memory: 1260k freed [ 38.900151] Freeing unused kernel memory: 504k freed [ 39.028531] ACPI: bus type USB registered [ 39.033378] usbcore: registered new interface driver usbfs [ 39.041557] usbcore: registered new interface driver hub [ 39.048441] usbcore: registered new interface driver ethub [ 39.054763] usbcore: registered new device driver usb [ 39.108659] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 39.108673] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 39.114535] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 39.322978] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 39.323018] xhci_hcd 0000:00:14.0: irq 133 for MSI/MSI-X [ 39.323435] xHCI xhci_add_endpoint called for root hub [ 39.323439] xHCI xhci_check_bandwidth called for root hub [ 39.323661] hub 1-0:1.0: USB hub found [ 39.327889] hub 1-0:1.0: 7 ports detected [ 39.333413] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 39.339265] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 39.347892] xHCI xhci_add_endpoint called for root hub [ 39.347896] xHCI xhci_check_bandwidth called for root hub [ 39.348094] hub 2-0:1.0: USB hub found [ 39.352316] hub 2-0:1.0: 6 ports detected [ 39.357060] port3: is a castrated xHC-port [ 39.361910] port4: is a castrated xHC-port [ 39.430044] braswell_synobios: module license 'Synology Inc.' taints kernel. [ 39.437935] Disabling lock debugging due to kernel taint [ 39.444704] ttyS1 - failed to request DMA [ 39.449302] 2021-4-5 9:17:18 UTC [ 39.452928] synobios: load, major number 201 [ 39.457716] Brand: Synology [ 39.460868] Model: DS-216+ [ 39.463910] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 39.473364] synobios cpu_arch proc entry initialized [ 39.478921] synobios crypto_hw proc entry initialized [ 39.484572] synobios syno_platform proc entry initialized [ 39.490627] synobios open /dev/ttyS1 success [ 39.507296] synobios: unload [ 39.527458] md: Autodetecting RAID arrays. [ 39.578171] md: invalid raid superblock magic on sda5 [ 39.583835] md: sda5 does not have a valid v0.90 superblock, not importing! [ 39.660104] md: invalid raid superblock magic on sdb5 [ 39.665757] md: sdb5 does not have a valid v0.90 superblock, not importing! [ 39.673557] md: Scanned 6 and added 4 devices. [ 39.678534] md: autorun ... [ 39.681660] md: considering sda1 ... [ 39.685665] md: adding sda1 ... [ 39.689280] md: sda2 has different UUID to sda1 [ 39.694351] md: adding sdb1 ... [ 39.697962] md: sdb2 has different UUID to sda1 [ 39.703042] md: created md0 [ 39.706166] md: bind [ 39.709218] md: bind [ 39.712260] md: running: [ 39.716714] md/raid1:md0: active with 2 out of 2 mirrors [ 39.776476] md0: detected capacity change from 0 to 2549940224 [ 39.783195] md: considering sda2 ... [ 39.787208] md: adding sda2 ... [ 39.790825] md: adding sdb2 ... [ 39.795222] md: created md1 [ 39.798365] md: bind [ 39.801415] md: bind [ 39.804462] md: running: [ 39.816536] md/raid1:md1: active with 2 out of 2 mirrors [ 39.856359] md1: detected capacity change from 0 to 2147418112 [ 39.863129] md: ... autorun DONE. [ 39.909331] md0: unknown partition table [ 40.656481] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 40.690301] Got empty serial number. Generate serial number from product. [ 40.699426] hub 1-4:1.0: USB hub found [ 40.704824] hub 1-4:1.0: 4 ports detected [ 41.651290] EXT4-fs (md0): barriers disabled [ 41.663811] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 41.839453] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 43.078434] usb 1-4.1: new high-speed USB device number 4 using xhci_hcd [ 44.210101] usb 1-4.2: new low-speed USB device number 5 using xhci_hcd [ 44.240585] usb 1-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 45.363114] usb 1-4.3: new high-speed USB device number 6 using xhci_hcd [ 46.610344] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 51.628163] usb 2-2: device descriptor read/8, error -110 [ 51.735101] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 51.763548] usb 2-2: device descriptor read/8, error -71 [ 53.769526] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 54.923107] EXT4-fs (md0): re-mounted. Opts: (null) [ 58.935959] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [ 60.296583] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 60.302687] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 60.701029] md1: unknown partition table [ 60.844684] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 63.953750] usb 2-2: device descriptor read/8, error -110 [ 64.060698] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [ 64.089174] usb 2-2: device descriptor read/8, error -71 [ 64.932218] NET: Registered protocol family 10 [ 64.981915] sit: IPv6 over IPv4 tunneling driver [ 65.550476] init: syno-auth-check main process (4546) killed by TERM signal [ 66.102405] ACPI: Requesting acpi_cpufreq [ 66.113698] Monitor-Mwait will be used to enter C-1 state [ 66.790757] fuse init (API version 7.22) [ 66.848905] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI [ 66.855737] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 66.901697] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3 [ 66.909010] Copyright (c) 2007-2015 Intel Corporation. [ 66.915395] igb 0000:01:00.0: irq 134 for MSI/MSI-X [ 66.915410] igb 0000:01:00.0: irq 135 for MSI/MSI-X [ 66.958560] igb 0000:01:00.0: added PHC on eth0 [ 66.963665] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 66.971400] igb 0000:01:00.0: eth0: (PCIe:2.5GT/s:Width x1) [ 66.977763] igb 0000:01:00.0 eth0: MAC: 12:34:56:78:9a:bc [ 66.983831] igb 0000:01:00.0: eth0: PBA No: Unknown [ 66.989323] igb 0000:01:00.0: LRO is disabled [ 66.994211] igb 0000:01:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 67.012576] systemd-udevd[4979]: starting version 204 [ 67.062804] Loading modules backported from Linux version v3.18.1-0-g39ca484 [ 67.070719] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c [ 67.646464] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 67.655633] ACPI: Power Button [PWR2] [ 67.659811] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 67.668963] ACPI: Sleep Button [SLPB] [ 67.673131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 67.681407] ACPI: Power Button [PWRF] [ 67.930547] Linux agpgart interface v0.103 [ 68.089057] [drm] Initialized drm 1.1.0 20060810 [ 68.415283] [drm] Memory usable by graphics device = 2048M [ 68.421459] i915 0000:00:02.0: setting latency timer to 64 [ 68.422001] mtrr: no more MTRRs available [ 68.426491] [drm] MTRR allocation failed. Graphics performance may suffer. [ 68.445688] i915 0000:00:02.0: irq 136 for MSI/MSI-X [ 68.445714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 68.453135] [drm] Driver supports precise vblank timestamp query. [ 68.498701] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 68.614977] acpi device:28: registered as cooling_device2 [ 68.621083] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 68.628854] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 68.638922] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 68.691560] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 68.740572] i915 0000:00:02.0: No connectors reported connected with modes [ 68.748306] [drm] Cannot find any crtc or sizes - going 1024x768 [ 69.114179] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 69.121115] i915 0000:00:02.0: registered panic notifier [ 69.219206] bio: create slab at 1 [ 69.270578] Btrfs loaded [ 69.308074] exFAT: Version 1.2.9 [ 69.772271] 2021-4-5 9:17:48 UTC [ 69.775895] synobios: load, major number 201 [ 69.780683] Brand: Synology [ 69.783833] Model: DS-216+ [ 69.786865] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 69.796319] synobios cpu_arch proc entry initialized [ 69.801876] synobios crypto_hw proc entry initialized [ 69.807530] synobios syno_platform proc entry initialized [ 69.813590] synobios open /dev/ttyS1 success [ 71.214548] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd [ 71.642854] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.692998] igb 0000:01:00.0: changing MTU from 1500 to 3000 [ 71.793742] ip_tables: (C) 2000-2006 Netfilter Core Team [ 71.853256] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 72.157452] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 72.698870] md: md2 stopped. [ 72.766489] md: bind [ 72.820475] md/raid1:md2: active with 1 out of 1 mirrors [ 72.855168] md2: detected capacity change from 0 to 2995645906944 [ 72.885341] md2: unknown partition table [ 72.897592] md: md3 stopped. [ 72.914703] md: bind [ 72.954466] md/raid1:md3: active with 1 out of 1 mirrors [ 72.984960] md3: detected capacity change from 0 to 7996616146944 [ 73.006061] md3: unknown partition table [ 73.990994] bio: create slab at 2 [ 74.474297] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 74.493867] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 76.232374] usb 2-2: device descriptor read/8, error -110 [ 76.339301] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd [ 76.371823] usb 2-2: device descriptor read/8, error -71 [ 76.877326] BTRFS: device label 2019.02.23-08:34:40 v23824 devid 1 transid 4270030 /dev/vg1001/lv [ 76.917660] BTRFS info (device dm-1): enabling auto syno reclaim space [ 76.924996] BTRFS info (device dm-1): using free space tree [ 76.931257] BTRFS: has skinny extents [ 77.050978] BTRFS: device label 2016.05.21-20:09:57 v7321 devid 1 transid 1273829 /dev/vg1000/lv [ 77.063491] BTRFS info (device dm-0): enabling auto syno reclaim space [ 77.070806] BTRFS: has skinny extents [ 79.346940] usb 1-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 83.733930] usb 2-2: new SuperSpeed USB device number 8 using xhci_hcd [ 88.796921] usb 2-2: device descriptor read/8, error -110 [ 88.903889] usb 2-2: new SuperSpeed USB device number 8 using xhci_hcd [ 88.932184] usb 2-2: device descriptor read/8, error -71 [ 96.063930] usb 2-2: new SuperSpeed USB device number 10 using xhci_hcd [ 96.456923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 96.521597] ehci-pci: EHCI PCI platform driver [ 96.742017] uhci_hcd: USB Universal Host Controller Interface driver [ 96.859950] usb-storage 1-5:1.0: USB Mass Storage device detected [ 96.867464] scsi3 : usb-storage 1-5:1.0 [ 96.871899] usb-storage 1-4.1:1.0: USB Mass Storage device detected [ 96.879241] scsi4 : usb-storage 1-4.1:1.0 [ 96.883849] usb-storage 1-4.3:1.0: USB Mass Storage device detected [ 96.900275] scsi5 : usb-storage 1-4.3:1.0 [ 96.904944] usbcore: registered new interface driver usb-storage [ 97.355144] usbcore: registered new interface driver usblp [ 97.641118] usbcore: registered new interface driver usbhid [ 97.647393] usbhid: USB HID core driver [ 97.875782] scsi 3:0:0:0: Direct-Access Synology DiskStation PMAP PQ: 0 ANSI: 6 [ 97.888325] sd 3:0:0:0: [synoboot] 245760 512-byte logical blocks: (125 MB/120 MiB) [ 97.889843] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 97.903594] scsi 4:0:0:0: Direct-Access WD Elements 25A3 1021 PQ: 0 ANSI: 6 [ 97.913898] sd 3:0:0:0: [synoboot] Write Protect is off [ 97.918297] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 97.925730] sd 3:0:0:0: [synoboot] Mode Sense: 23 00 00 00 [ 97.927396] scsi 5:0:0:0: Direct-Access WD My Book 1140 1019 PQ: 0 ANSI: 6 [ 97.937348] sd 3:0:0:0: [synoboot] No Caching mode page found [ 97.943838] sd 3:0:0:0: [synoboot] Assuming drive cache: write through [ 97.946692] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 97.951231] sd 4:0:0:0: [sdq] Very big device. Trying to use READ CAPACITY(16). [ 97.965407] sd 4:0:0:0: [sdq] 15627986944 512-byte logical blocks: (8.00 TB/7.27 TiB) [ 97.974216] sd 4:0:0:0: [sdq] 4096-byte physical blocks [ 97.982677] scsi 5:0:0:1: Enclosure WD SES Device 1019 PQ: 0 ANSI: 6 [ 97.993340] sd 3:0:0:0: [synoboot] No Caching mode page found [ 97.999852] sd 3:0:0:0: [synoboot] Assuming drive cache: write through [ 98.000341] sd 4:0:0:0: [sdq] Write Protect is off [ 98.000346] sd 4:0:0:0: [sdq] Mode Sense: 47 00 10 08 [ 98.000435] scsi 5:0:0:1: Attached scsi generic sg5 type 13 [ 98.018952] sd 5:0:0:0: [sdr] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 98.028106] sd 4:0:0:0: [sdq] No Caching mode page found [ 98.034093] sd 4:0:0:0: [sdq] Assuming drive cache: write through [ 98.034141] synoboot: synoboot1 synoboot2 [ 98.046415] sd 4:0:0:0: [sdq] Very big device. Trying to use READ CAPACITY(16). [ 98.057402] sd 3:0:0:0: [synoboot] No Caching mode page found [ 98.063865] sd 3:0:0:0: [synoboot] Assuming drive cache: write through [ 98.071239] sd 3:0:0:0: [synoboot] Attached SCSI disk [ 98.073039] sd 5:0:0:0: [sdr] Write Protect is off [ 98.073044] sd 5:0:0:0: [sdr] Mode Sense: 47 00 10 08 [ 98.082407] sd 5:0:0:0: [sdr] No Caching mode page found [ 98.088378] sd 5:0:0:0: [sdr] Assuming drive cache: write through [ 98.099579] sd 5:0:0:0: [sdr] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 98.099583] sd 4:0:0:0: [sdq] No Caching mode page found [ 98.099589] sd 4:0:0:0: [sdq] Assuming drive cache: write through [ 98.134401] sd 5:0:0:0: [sdr] No Caching mode page found [ 98.140391] sd 5:0:0:0: [sdr] Assuming drive cache: write through [ 99.325810] Syno_HddMon: Initialization completed. [ 99.597605] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(00113258afd4). [ 99.694274] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 99.801304] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 99.814800] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 100.023481] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled. [ 100.032749] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled. [ 100.042136] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. [ 100.052189] iSCSI:target_core_ep.c:786:ep_attach_hba RODSP plugin for epio is enabled. [ 100.061059] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled. [ 101.081535] usb 2-2: device descriptor read/8, error -110 [ 101.188490] usb 2-2: new SuperSpeed USB device number 10 using xhci_hcd [ 101.216822] usb 2-2: device descriptor read/8, error -71 [ 104.756439] FAT-fs (synoboot2): fat_set_state: set=1 process=synopkicompatsy pid=10760 [ 104.794941] FAT-fs (synoboot2): fat_set_state: set=0 process=synopkicompatsy pid=10760 [ 108.337329] usb 2-2: new SuperSpeed USB device number 12 using xhci_hcd [ 108.637871] sdr: sdr1 [ 108.642704] sd 5:0:0:0: [sdr] 732558336 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 108.668225] sd 5:0:0:0: [sdr] No Caching mode page found [ 108.674184] sd 5:0:0:0: [sdr] Assuming drive cache: write through [ 108.681021] sd 5:0:0:0: [sdr] Attached SCSI disk [ 108.774874] warning: nginx' uses 32-bit capabilities (legacy support in use) [ 108.775913] warning: nginx' uses 32-bit capabilities (legacy support in use) [ 109.908944] loop: module loaded [ 113.355117] usb 2-2: device descriptor read/8, error -110 [ 113.462067] usb 2-2: new SuperSpeed USB device number 12 using xhci_hcd [ 113.490815] usb 2-2: device descriptor read/8, error -71 [ 117.388223] sdq: sdq1 [ 117.392618] sd 4:0:0:0: [sdq] Very big device. Trying to use READ CAPACITY(16). [ 117.563026] sd 4:0:0:0: [sdq] No Caching mode page found [ 117.568994] sd 4:0:0:0: [sdq] Assuming drive cache: write through [ 117.575832] sd 4:0:0:0: [sdq] Attached SCSI disk [ 119.139148] ata1.00: configured for UDMA/133 [ 119.143940] ata1: EH complete [ 120.615898] usb 2-2: new SuperSpeed USB device number 14 using xhci_hcd [ 120.629536] ata2.00: configured for UDMA/133 [ 120.634357] ata2: EH complete [ 125.637717] usb 2-2: device descriptor read/8, error -110 [ 125.744660] usb 2-2: new SuperSpeed USB device number 14 using xhci_hcd [ 125.773225] usb 2-2: device descriptor read/8, error -71 [ 132.937529] usb 2-2: new SuperSpeed USB device number 16 using xhci_hcd [ 133.442610] r8152: module verification failed: signature and/or required key missing - tainting kernel [ 133.453602] usbcore: registered new interface driver r8152 [ 137.956344] usb 2-2: device descriptor read/8, error -110 [ 138.063363] usb 2-2: new SuperSpeed USB device number 16 using xhci_hcd [ 138.091934] usb 2-2: device descriptor read/8, error -71 [ 145.268106] usb 2-2: new SuperSpeed USB device number 18 using xhci_hcd [ 150.285912] usb 2-2: device descriptor read/8, error -110 [ 150.392859] usb 2-2: new SuperSpeed USB device number 18 using xhci_hcd [ 150.433851] usb 2-2: device descriptor read/8, error -71 [ 150.737236] aufs 3.10.x-20141110 [ 151.019257] Bridge firewalling registered [ 153.296795] init: synoscheduler-vmtouch main process (3940) killed by TERM signal [ 157.643680] usb 2-2: new SuperSpeed USB device number 20 using xhci_hcd [ 162.661507] usb 2-2: device descriptor read/8, error -110 [ 162.768431] usb 2-2: new SuperSpeed USB device number 20 using xhci_hcd [ 162.798450] usb 2-2: device descriptor read/8, error -71 [ 163.258534] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 167.424168] device docker36de10e entered promiscuous mode [ 167.436987] IPv6: ADDRCONF(NETDEV_UP): docker36de10e: link is not ready [ 169.921260] usb 2-2: new SuperSpeed USB device number 22 using xhci_hcd [ 173.220372] init: synoscheduler-vmtouch main process (14515) killed by TERM signal [ 174.939059] usb 2-2: device descriptor read/8, error -110 [ 175.046028] usb 2-2: new SuperSpeed USB device number 22 using xhci_hcd [ 175.075429] usb 2-2: device descriptor read/8, error -71 [ 175.178035] cgroup: runc (15441) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 176.970994] IPv6: ADDRCONF(NETDEV_CHANGE): docker36de10e: link becomes ready [ 176.978925] docker0: port 1(docker36de10e) entered forwarding state [ 176.985968] docker0: port 1(docker36de10e) entered forwarding state [ 176.993640] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 182.198871] usb 2-2: new SuperSpeed USB device number 24 using xhci_hcd [ 183.125463] init: synoscheduler-vmtouch main process (15357) killed by TERM signal [ 185.850341] init: synoscheduler-vmtouch main process (15738) killed by TERM signal [ 187.216665] usb 2-2: device descriptor read/8, error -110 [ 187.323636] usb 2-2: new SuperSpeed USB device number 24 using xhci_hcd [ 187.352051] usb 2-2: device descriptor read/8, error -71 [ 191.476011] init: synoscheduler-vmtouch main process (16065) killed by TERM signal [ 191.995467] docker0: port 1(docker36de10e) entered forwarding state [ 194.093111] init: synoscheduler-vmtouch main process (16430) killed by TERM signal [ 194.574473] usb 2-2: new SuperSpeed USB device number 26 using xhci_hcd [ 197.105528] init: synoscheduler-vmtouch main process (16600) killed by TERM signal [ 198.301107] init: synoscheduler-vmtouch main process (16801) killed by TERM signal [ 199.592584] usb 2-2: device descriptor read/8, error -110 [ 199.699216] usb 2-2: new SuperSpeed USB device number 26 using xhci_hcd [ 199.729185] usb 2-2: device descriptor read/8, error -71 [ 200.014317] init: synoscheduler-vmtouch main process (16868) killed by TERM signal [ 201.079661] init: synoscheduler-vmtouch main process (17025) killed by TERM signal [ 206.852088] usb 2-2: new SuperSpeed USB device number 28 using xhci_hcd [ 211.890883] usb 2-2: device descriptor read/8, error -110 [ 211.997848] usb 2-2: new SuperSpeed USB device number 28 using xhci_hcd [ 212.028310] usb 2-2: device descriptor read/8, error -71 [ 213.201236] init: synocontentextractd main process ended, respawning [ 219.226653] usb 2-2: new SuperSpeed USB device number 30 using xhci_hcd [ 224.244443] usb 2-2: device descriptor read/8, error -110 [ 224.351410] usb 2-2: new SuperSpeed USB device number 30 using xhci_hcd [ 224.380285] usb 2-2: device descriptor read/8, error -71 [ 230.724022] perf interrupt took too long (2508 > 5000), lowering kernel.perf_event_max_sample_rate to 50000 [ 231.504266] usb 2-2: new SuperSpeed USB device number 32 using xhci_hcd [ 236.522051] usb 2-2: device descriptor read/8, error -110 [ 236.629083] usb 2-2: new SuperSpeed USB device number 32 using xhci_hcd [ 236.657444] usb 2-2: device descriptor read/8, error -71 [ 243.782842] usb 2-2: new SuperSpeed USB device number 34 using xhci_hcd [ 248.800661] usb 2-2: device descriptor read/8, error -110 [ 248.907591] usb 2-2: new SuperSpeed USB device number 34 using xhci_hcd [ 248.939605] usb 2-2: device descriptor read/8, error -71 [ 256.061424] usb 2-2: new SuperSpeed USB device number 36 using xhci_hcd [ 261.079250] usb 2-2: device descriptor read/8, error -110 [ 261.186188] usb 2-2: new SuperSpeed USB device number 36 using xhci_hcd [ 261.214687] usb 2-2: device descriptor read/8, error -71 [ 268.339018] usb 2-2: new SuperSpeed USB device number 38 using xhci_hcd [ 273.356833] usb 2-2: device descriptor read/8, error -110 [ 273.463781] usb 2-2: new SuperSpeed USB device number 38 using xhci_hcd [ 273.493198] usb 2-2: device descriptor read/8, error -71 [ 280.616606] usb 2-2: new SuperSpeed USB device number 40 using xhci_hcd [ 285.634414] usb 2-2: device descriptor read/8, error -110 [ 285.741362] usb 2-2: new SuperSpeed USB device number 40 using xhci_hcd [ 285.769671] usb 2-2: device descriptor read/8, error -71 [ 292.894220] usb 2-2: new SuperSpeed USB device number 42 using xhci_hcd [ 297.913006] usb 2-2: device descriptor read/8, error -110 [ 298.019953] usb 2-2: new SuperSpeed USB device number 42 using xhci_hcd [ 298.048299] usb 2-2: device descriptor read/8, error -71 [ 305.172795] usb 2-2: new SuperSpeed USB device number 44 using xhci_hcd [ 310.190613] usb 2-2: device descriptor read/8, error -110 [ 310.297565] usb 2-2: new SuperSpeed USB device number 44 using xhci_hcd [ 310.330578] usb 2-2: device descriptor read/8, error -71 [ 317.450386] usb 2-2: new SuperSpeed USB device number 46 using xhci_hcd [ 322.468197] usb 2-2: device descriptor read/8, error -110 [ 322.575147] usb 2-2: new SuperSpeed USB device number 46 using xhci_hcd [ 327.593023] usb 2-2: device descriptor read/8, error -110 [ 335.588814] usb 2-2: new SuperSpeed USB device number 48 using xhci_hcd [ 335.606958] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 335.744973] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 335.762894] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 335.773143] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 335.783268] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 335.793391] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 335.891932] netif_napi_add() called with weight 256 on device eth%d [ 335.903910] r8152 2-2:1.0 eth1: v2.14.0 (2020/09/24) [ 335.909482] r8152 2-2:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[ 338.746276] init: nmbd main process (20635) killed by TERM signal [ 338.788241] init: scsi_plugin_server main process (10519) killed by TERM signal [ 430.534884] usbcore: deregistering interface driver r8152 [ 443.310894] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 443.328890] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 443.339129] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 443.349254] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 443.359380] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 443.921713] r8152 2-2:1.0 (unregistered net_device): set_registers -110 [ 443.978939] r8152 2-2:1.0 eth1: v2.14.0 (2020/09/24) [ 443.984517] r8152 2-2:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[ 444.002009] usbcore: registered new interface driver r8152 [ 444.131916] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 444.149972] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 444.160518] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 444.170656] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 444.180776] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 449.084093] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 449.366320] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 449.375424] r8152 2-2:1.0 eth1: carrier on [ 452.415504] init: nmbd main process (23570) killed by TERM signal [ 452.572490] init: scsi_plugin_server main process (20679) killed by TERM signal [ 454.991982] init: iscsi_pluginserverd main process (23629) killed by TERM signal [ 455.109002] init: iscsi_pluginengined main process (23625) killed by TERM signal [ 455.578400] init: scsi_plugin_server main process (23634) killed by TERM signal [ 457.987211] init: iscsi_pluginserverd main process (24206) killed by TERM signal [ 458.173710] init: iscsi_pluginengined main process (24169) killed by TERM signal [ 458.811853] init: scsi_plugin_server main process (24276) killed by TERM signal [ 460.902539] init: iscsi_pluginserverd main process (24946) killed by TERM signal [ 461.080835] init: iscsi_pluginengined main process (24930) killed by TERM signal [ 461.561792] init: scsi_plugin_server main process (25061) killed by TERM signal [ 464.308209] init: nmbd main process (25913) killed by TERM signal [ 464.521718] init: iscsi_pluginserverd main process (25573) killed by TERM signal [ 464.550926] init: iscsi_pluginengined main process (25550) killed by TERM signal [ 464.651395] init: scsi_plugin_server main process (25643) killed by TERM signal [ 467.827800] init: iscsi_pluginserverd main process (26052) terminated with status 255 [ 467.838036] init: iscsi_pluginserverd main process ended, respawning [ 472.475872] usb 1-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 935.118416] ------------[ cut here ]------------ [ 935.123592] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x24b/0x260() [ 935.131667] NETDEV WATCHDOG: eth1 (r8152): transmit queue 0 timed out [ 935.138877] Modules linked in: r8152(OF) bridge stp aufs macvlan veth xt_conntrack xt_addrtype ipt_MASQUERADE xt_REDIRECT xt_nat iptable_nat nf_nat_ipv4 nf_nat cifs udf isofs loop tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) syno_hddmon(P) hid_generic usbhid hid usblp usb_storage uhci_hcd ehci_pci ehci_hcd xt_mac xt_geoip(O) compat_xtables(O) nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables braswell_synobios(PO) leds_lp3943 exfat(O) btrfs i915 drm_kms_helper cfbfillrect cfbcopyarea cfbimgblt output drm fb fbdev intel_agp [ 935.218609] intel_gtt agpgart video backlight button synoacl_vfs(PO) zlib_deflate hfsplus md4 hmac libcrc32c compat(O) igb(O) i2c_algo_bit e1000e(O) vxlan fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq mperf processor thermal_sys cpufreq_stats freq_table dm_snapshot crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 sg etxhci_hcd xhci_hcd usbcore usb_common [last unloaded: r8152] [ 935.276636] CPU: 0 PID: 0 Comm: swapper/0 Tainted: PF O 3.10.105 #25426 [ 935.284911] Hardware name: Synology Inc. DS216+/Type2 - Board Product Name, BIOS M.616 3/2/2016 [ 935.294641] ffffffff814b5acb ffffffff81036b08 0000000000000000 ffff88027fc03e68 [ 935.302947] 0000000000000001 0000000000000000 0000000000000060 ffffffff81036b69 [ 935.311262] ffffffff8173c708 ffff880200000030 ffff88027fc03e78 ffff88027fc03e38 [ 935.319569] Call Trace: [ 935.322304] <IRQ> [] ? dump_stack+0xc/0x15 [ 935.328845] [] ? warn_slowpath_common+0x58/0x70 [ 935.335757] [] ? warn_slowpath_fmt+0x49/0x50 [ 935.342379] [] ? trigger_load_balance+0x53/0x200 [ 935.349390] [] ? dev_watchdog+0x24b/0x260 [ 935.355719] [] ? dev_graft_qdisc+0x70/0x70 [ 935.362148] [] ? call_timer_fn.isra.32+0x1c/0x80 [ 935.369159] [] ? run_timer_softirq+0x16a/0x1f0 [ 935.375976] [] ? __do_softirq+0xc6/0x1a0 [ 935.382211] [] ? call_softirq+0x1c/0x1a0 [ 935.388445] [] ? do_softirq+0x35/0x70 [ 935.394387] [] ? irq_exit+0x95/0xa0 [ 935.400138] [] ? smp_apic_timer_interrupt+0x67/0xa0 [ 935.407443] [] ? apic_timer_interrupt+0x15f/0x170 [ 935.414548] <EOI> [] ? arch_remove_reservations+0x110/0x110 [ 935.422744] [] ? default_idle+0x2/0x10 [ 935.428782] [] ? arch_cpu_idle+0x5/0x20 [ 935.434920] [] ? cpu_startup_entry+0x7d/0x160 [ 935.441642] [] ? start_kernel+0x3ad/0x3b5 [ 935.447973] ---[ end trace 53eba09cbc5258e6 ]--- [ 935.453140] r8152 2-2:1.0 eth1: Tx timeout [ 935.459580] r8152 2-2:1.0 eth1: Tx status -2 [ 935.464362] r8152 2-2:1.0 eth1: Tx status -71 [ 935.469232] r8152 2-2:1.0 eth1: Tx status -2 [ 935.474007] r8152 2-2:1.0 eth1: Tx status -71 [ 937.491537] r8152 2-2:1.0 eth1: get_registers -108 [ 937.496905] r8152 2-2:1.0 eth1: get_registers -2 [ 937.502074] r8152 2-2:1.0 eth1: get_registers -2 [ 937.507241] r8152 2-2:1.0 eth1: get_registers -2 [ 937.512412] r8152 2-2:1.0 eth1: get_registers -2 [ 937.517580] r8152 2-2:1.0 eth1: get_registers -2 [ 937.522749] r8152 2-2:1.0 eth1: get_registers -2 [ 937.527916] r8152 2-2:1.0 eth1: get_registers -2 [ 937.540923] r8152 2-2:1.0 eth1: get_registers -71 [ 937.549680] r8152 2-2:1.0 eth1: get_registers -71 [ 937.558425] r8152 2-2:1.0 eth1: get_registers -71 [ 937.567183] r8152 2-2:1.0 eth1: get_registers -71 [ 937.575920] r8152 2-2:1.0 eth1: get_registers -71 [ 937.584679] r8152 2-2:1.0 eth1: get_registers -71 [ 937.593420] r8152 2-2:1.0 eth1: get_registers -71 [ 937.602171] r8152 2-2:1.0 eth1: get_registers -71 [ 937.658664] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 937.679536] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 937.707602] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 937.717732] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 937.727854] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 976.109750] r8152 2-2:1.0 eth1: Tx timeout [ 976.115916] r8152 2-2:1.0 eth1: Tx status -2 [ 976.120699] r8152 2-2:1.0 eth1: Tx status -71 [ 976.125569] r8152 2-2:1.0 eth1: Tx status -2 [ 976.130345] r8152 2-2:1.0 eth1: Tx status -71 [ 976.259994] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 976.277908] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 976.288173] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 976.298299] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 976.308418] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 1011.117162] r8152 2-2:1.0 eth1: Tx timeout [ 1011.124546] r8152 2-2:1.0 eth1: Tx status -2 [ 1011.129323] r8152 2-2:1.0 eth1: Tx status -71 [ 1011.134194] r8152 2-2:1.0 eth1: Tx status -2 [ 1011.138969] r8152 2-2:1.0 eth1: Tx status -71 [ 1011.269405] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 1011.287314] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1011.297547] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 1011.307668] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 1011.317791] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 1235.216089] r8152 2-2:1.0 eth1: get_registers -110 [ 1235.349283] usb 2-2: reset SuperSpeed USB device number 48 using xhci_hcd [ 1235.367294] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1235.377666] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcec0 [ 1235.387794] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf00 [ 1235.397918] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802548fcf40 [ 1781.376982] init: smbd main process (11291) killed by TERM signal [ 1790.853397] init: smbd main process (15684) killed by TERM signal

Output of lsusb command

|__usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (xhci_hcd 0000:00:14.0) hub |__1-4 05e3:0610:6202 09 2.10 480MBit/s 100mA 1IF (GenesysLogic USB2.1 Hub ffffffd6ffffffa3ffffffebffffffcb) hub |__1-4.1 1058:25a3:1021 00 2.10 480MBit/s 30mA 1IF (Western Digital Elements 25A3 37534B5945324C57) |__1-4.2 051d:0002:0106 00 1.10 1.5MBit/s 24mA 1IF (American Power Conversion Back-UPS XS 700U FW:924.Z5 .I USB FW:Z5 3B2009X61229 ) |__1-4.3 1058:1140:1019 00 2.10 480MBit/s 12mA 1IF (Western Digital My Book 1140 574D43315430393830313533) |__1-5 f400:f400:0100 00 2.00 480MBit/s 200mA 1IF (Synology DiskStation 65006210CCA34F25) |__usb2 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (xhci_hcd 0000:00:14.0) hub |__2-2 0bda:8156:3000 00 3.20 5000MBit/s 512mA 1IF (Realtek USB 10/100/1G/2.5G LAN 000000001)

Output of ifconfig -a command

docker0 Link encap:Ethernet HWaddr 02:42:88:EF:8E:A9 inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0 inet6 addr: fe80::42:88ff:feef:8ea9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:156 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46383 (45.2 KiB) TX bytes:17713 (17.2 KiB)

docker36d Link encap:Ethernet HWaddr A6:33:2D:11:3F:85 inet6 addr: fe80::a433:2dff:fe11:3f85/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:156 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:48567 (47.4 KiB) TX bytes:18181 (17.7 KiB)

eth0 Link encap:Ethernet HWaddr 00:11:32:58:AF:D4 inet addr:192.168.192.9 Bcast:192.168.192.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:3000 Metric:1 RX packets:34805 errors:0 dropped:0 overruns:0 frame:0 TX packets:39264 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8373153 (7.9 MiB) TX bytes:13784023 (13.1 MiB)

eth1 Link encap:Ethernet HWaddr A0:CE:C8:E1:E3:AF inet addr:192.168.192.123 Bcast:192.168.192.255 Mask:255.255.255.0 inet6 addr: fe80::a2ce:c8ff:fee1:e3af/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:114158 errors:0 dropped:0 overruns:0 frame:0 TX packets:171726 errors:73 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:74504429 (71.0 MiB) TX bytes:236763953 (225.7 MiB)

lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:30829 errors:0 dropped:0 overruns:0 frame:0 TX packets:30829 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8130097 (7.7 MiB) TX bytes:8130097 (7.7 MiB)

sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

EvertKlevert avatar Apr 05 '21 09:04 EvertKlevert

It seems that Club 3D doesn't function very well. I use the Plugable 2.5gb on a DS916+ ... it works flawlessly and it transmitting continuously because I use a camera with Surveillance Station. Can't you swap the adapter?

Sjekke avatar Apr 05 '21 10:04 Sjekke

-edit-

I get it. Plugable is a brand, not a function. Currently not available on amazon. https://www.amazon.nl/Plugable-Ethernet-adapter-compatibel-Thunderbolt/dp/B084L4JL9K

EvertKlevert avatar Apr 05 '21 10:04 EvertKlevert

Inderdaad 😃

Sjekke avatar Apr 12 '21 18:04 Sjekke

In case you still have the problem: https://github.com/bb-qq/r8152/issues/114#issuecomment-828359849

Raychan87 avatar Apr 28 '21 11:04 Raychan87

With my Ds216+ with 8GB Ram, the Club 3D USB 3.2 Gen1 Adapter Type-A to 2.5 Gigabit Ethernet works without any problems. The data throughput remains constant.

Knoddel avatar Oct 16 '22 15:10 Knoddel

@EvertKlevert, sorry I haven't been able to reply.

The problem seems to be caused by your environment, as there are other reports of it working. From your logs, it seems that you have many USB devices attached, so disconnecting all USB devices except the ethernet dongle may improve the symptoms.

bb-qq avatar Dec 04 '22 02:12 bb-qq