Ben V. Brown
Ben V. Brown
@ReimuHakurei I have not been able to replicate the profile mode issues you have mentioned here. How did you build the firmware? @StevenSeifried I believe the cut off should be...
@ReimuHakurei yeah that would make sense. I advise to do all commands inside the docker container to ensure we are all using the same tooling. Can you check it's working...
This is most likely something missing in the drawing modes for the higher res oled screen. I'll try and have a look tonight
Phase printing should work now I think
Hardware should work, just the UI is limited
Hia, This definitely screams of a bad OLED init sequence. Are you able to build IronOS yourself? It's most likely one of these : https://github.com/Ralim/IronOS/blob/4ce63fab47fae2b2f76eab366edd4d449053188f/source/Core/Drivers/OLED.cpp#L36 I would be suspect its...
You will need a custom device to capture the traffic sadly. Thinking more on this, I dont think its going to be a PD issue to brick the supply as...
Can you try testing with a USB 2.0 USB-C cable being used to connect to the dock to rule out it interfering with the debug signals that are on the...
Hia, can you please when you have time re-test with the latest RC?
By default the Pinecil exposes some extra buses on the USB3 pins to allow for people to tinker with it easier. I'd be suspect that the dock is also using...