Ben V. Brown
Ben V. Brown
>Can I generate PD logs somehow? Not trivially, and getting stuck in that state means that IronOS hasn't _seen_ any valid PD announcements from the charger. I have a bunch...
Buzzer is fitted in the MHP30, and the Sequre devices iirc. On the MHP30 it is used to alert when at temperature. On the Sequre units its not currently used...
@FleXoft It would be helpful; if you can; if you could list out a list of roughly when you would want the buzzer to do something, and what it should...
Ahhh this is indeed weird, and definitely not expected. Can I ask in the debug menu what tip resistance does the tip get detected as (both good and bad ones...
That indicates that the TS-B2 tip is likely open circuit; any chance you have a multimeter or means of measuring the tip resistance?
Hello, Can you please check which mode you have the PD negotiation set to? You may have it set to conservative or no pps modes. If that doesn't change anything,...
Trying for more stability of the temperature control mostly. Ie it holds the setpoints temp better and less jittery
Eugh; I dont see this here on my PD supplies. Do you have any means of capturing the PD traffic?
@stestagg Any chance you can do a capture on the later 2.23 rc's by any chance? I haven't been able to reproduce a capture to match yours on my on...
Hmm looks like for some reason its re-trying for some reason. Smells of bad interrupted quirks 😢 No way to get debug out on TS101 reasily, I do all my...