Ben V. Brown
Ben V. Brown
On the exit at 200C issue; can you try commenting out lines 166-171 in Soldering.cpp to remove the thermal runaway protection. This is my biggest suspicion on what would be...
Hia, This is great progress. The black screen at startup is _odd_. PD negotiation shouldn't block boot. Is it possible its being restarted rapidly with flaky USB-PD? (Do you have...
> I'm currently digging a bit through the code and debug outputs of the iron. I wondered why it reports PWR QC instead of PWR PD. I think at least...
>so default is 2000ms? :-o Ah sorry, I think we raised the default later on. >How did you determined the value for the OP_AMP_GAIN_STAGE This number is calculated as being...
Let me know when you are happy with this by marking it ready for review 🙇🏼
> @Ralim, I tried your increased pwm speed. Works great on the S99! No more restarts, even with power limit set to 60W on a 60W USB-C charger. Glad it...
> @Ralim do you have a advice for a clean solution? Assuming you mean for detecting the I2C bus pins? If so, your going to need approximately that logic _somewhere_....
At the least we all seem to be on the same page then. Normally I'm all for `GPLv3-or-later` and its annoying that PineFlash is GPLv2. I'm happy to go with...
As no one has raised any complaints I'll open a PR shortly to licence as `GPLv2-or-later`
I've had a crack at a different style of detector. Could you try these builds? https://github.com/Ralim/IronOS/actions/runs/12209178967 @Eheran1 / @Tekz42