IronOS request to add the QC 2.0 (9V or 12V) maximum voltage selection function to the settings

Describe the solution you'd like

Describe alternatives you've considered

Additional context

Sep 27 '22 08:09 StepanKoshman

Hi, Can you please elaborate further? As of present QC2.0 is not supported and just QC3 is used. What is the use case? What device is this for? Why does the existing QC3 support not work for you?

Oct 05 '22 09:10 Ralim

SKY202210278_171077 SKY202210278_171042 SKY202210278_171003 SKY202210278_171086 SKY202210278_171061 SKY202210278_171098 Xiaomi powerbank 2i, pinecil v2. As you can see from the photo above, the bank does not support QC 3.0, but only QC 2.0. up to 12 volts. But my pinecil v2 only raises the voltage to 9 volts, while the power does not exceed 10 watts. When I force the voltage to 12 volts with an external trigger, the power reaches 18 watts.

Oct 05 '22 15:10 StepanKoshman

@StepanKoshman Is this issue still present? If not, please don't forget to close. 😊

Sep 23 '23 22:09 discip

@StepanKoshman Эта проблема все еще существует? Если нет, не забудьте закрыть. 😊

Yes, this is still relevant for me...

Sep 23 '23 22:09 StepanKoshman