emanual

emanual copied to clipboard

RINC Proofreading of English DXL Y content

2

Jonathon-RINC

This sections lists the `Min/Max Position Limit(48, 52)` in the wrong order twice. When Min is address 52 and Max is address 48. Later confirmed in the last line: `Max...

zapwizard

link: https://emanual.robotis.com/docs/en/platform/openmanipulator_x/quick_start_guide_basic_operation/ issue with using dashing. Ro2 Dashing Robotic Arm fix 1. replace piece of code in open_manipulator_x_controller/launch/open_manipulator_x_controller.launch.py from " Node( package='open_manipulator_x_controller', executable='open_manipulator_x_controller', name='open_manipulator_x_controller', arguments=[usb_port, baud_rate], parameters=[param_dir], output='screen'), " to...

jvolheim

[Improvement] Please indicate that LDS_MODEL variable should be set on both PC and TurtleBot3

1

I recently moved to ROS 2. I get an error and abort when trying to use LiDAR with turtlebot3_cartographer and others with old TurtleBot3s. However the newer one with LDS-02...

kotokaze

EMI(Electromagnetic interference) using U2D2 Power Hub

1

Good afternoon I am using the U2D2 Power Hub to control two dynamixel motors. First I controlled them using the dynamixel wizard software to check everything was correct and then...

alexlt97

Hi, I'm trying to connect to an XM430-210-R engine through a gateway that converts RS485 to telnet in order to access the engine through my local network. To connect to...

omarion88

Hi, I am currently testing the nav2 stack on a physical TB3, and have gotten everything up and running till the point where I want to load my map into...

PVBrodersen

The Size (Byte) listed in the Y series control table is inaccurate across the board. It has been several weeks since I pointed out that problem to a certain place,...

mukyokyo