Paulus H.J. Schulinck

I was not successful with fbcp-ili9341 on a RPi400 + Pimoroni Flat Hat Hacker board + Pimoroni Display Hat Mini 2.0inch 320x240px (DHM2) with OS bullseye. Next installed OS version...

Hi Philip, Thank you! I now also have bullseye running on the RPiZero2W. Running the pong script is OK. However pygame-demo.py and pygame-basic.py have no video output to the Display...

I don't know if I did it in a correct way: Because of a CMake warning (see image)  to add a detection to the RPiZero2W, in CMakeLists.txt I added...

After many trials, while using my ```Android Tablet``` and the ```EspTouch app``` from the ```Google Play store```, I managed to get ```SmartConfig``` working. After WiFi connection was established on the...

Thank you for your comment, explanations and new ideas. Yep, that's a nice solution to be able to use "normal" and "condensed" fonts in that suggested way. In this moment...

Thanks!

Update: beside the above mentioned issue I now was able to successfully build the Pimoroni/displayhatmini-fbdev-dts/displayhatmini-overlay.dtbo; copy that file to /boot/overlays; do the necessary settings in /boot/config.txt; open F2 console; issue...

Hi Philip, thank you for your rapid reply. The addition about fbdev was only to indicate that I was progressing in getting things on the device. Reading your reply do...

Ijust commented out the lines (in /boot/config.txt): dtoverlay=spi0-1cs,cs0_pin=7,cs1_spidev=disabled dtoverlay=displayhatmini Then went to ~/pimoroni/displayhatmini-python/examples and ran ./pygame-demo.py. Now no crash; backlight on; LED on right side of display blinked once then...

Thank you for your reply! I am using the lvgl which is a componentent in the Espressif esp-box repo. Below a screenshot of the lvgl/library.properties file.