OpenUAS
OpenUAS
To make an analog sonar usable by adding and option to filter the often noisy output. Normal sane advice could be to use either PWM or I2C version of the...
On a Lisa MXS flightcontroller I've flashed git object ID 0b64c15879fd9659c85c5c03b2041551f871e8fa This is the closest ID I could find before the massive changes of building the firmware where pulled in....
When no GNSS device is available in airframe, e.g. optical nav, or pure FPV for indi control tests, there is now an error in the max7456.c latest changes, was not...
... modules/display/max7456.c:75:9: note: #pragma message: BAT_CAPACITY not defined, 5000 mah will be used. Although MAX_BAT_CAPACITY is define and should be used ``` ... ... ```
# Description As user I would like to have a flightplan that is usable for as well FW and Rotorcraft mode, A.k.a hybrid vehicle. For this one needs universal fixedwing...
On the path to unified Rotorcraft, Fixedwing code function like thes should be added along the way, and likely 100's more ;) ## Want to back this issue? **[Post a...
As a user I woud like to be able to set non liniar behavior of a actuator depending on AP PPRZ value input at the moment I cannnot set a...
With the event of more acurate UA position options like Piksi and also using Vicon and optitrac systems there is no setting for the airframe to set what we consider...
AS a user I want a simple way to upload my AP software to the AP board. the newer Lisa v2 MX has an F4. THe working of flasing by...
As of PPRZ master of 20240619 (unknown SHA sorry) the PPM input no longer works on an OrangeCube(+). PPM was as always connected to the AUX OUTPUT 4 with RX...