OK1SLM

sudo nano /lib/systemd/system/autowx2.service [Unit] Description=autowx2 After=multi-user.target [Service] Restart=always RestartSec=10 WorkingDirectory=/home/pi/autowx2 ExecStart=/usr/bin/python /home/pi/autowx2/autowx2.py [Install] WantedBy=multi-user.target sudo chmod 644 /lib/systemd/system/autowx2.service sudo systemctl daemon-reload sudo systemctl enable autowx2.service sudo systemctl start autowx2.service

Yes, the radiosonde are running and I want them to run

2020-05-26 16:51:13,294 INFO:Scanner #00000004 - Detected peaks on 6 frequencies (MHz): [ 403.2 401.65 401.19 401.3 401.93 405.49] 2020-05-26 16:52:28,216 INFO:Scanner #00000004 - Running frequency scan. 2020-05-26 16:53:28,256 CRITICAL:Scanner #00000004...

So the first images of autowx Meteor M2, Meteor M2-2 http://www.ok1slm.cz/recordings/meteor/img/2019/09/20/index.html

Config https://gofile.io/?c=IOF5fV

Yes, I read and I ask. But another problem after the end of the program is that the program does not end and remains stuck. I had to restart. 2019-02-23...

pi@raspberrypi:~ $ cd autowx2 pi@raspberrypi:~/autowx2 $ python autowx2.py 2019-02-24 12:48 ⚡ Program start 2019-02-24 12:48 Killing all remaining rtl_* processes... WebSocket transport not available. Install eventlet or gevent and gevent-websocket...

radiosonde_auto_rx Note: If you have either gevent or eventlet installed, these will need to be uninstalled so that the Flask-SocketIO does not try to use it. If you didn't understand...

sudo wxtoimg :yes Enter

Hi install sudo bash install.sh no bash install.sh