radiosonde_auto_rx

[OK1SLM]

2020-05-23 11:00:41,908 INFO:APRS-IS - Uploaded to APRS-IS: OK1SLM-15>APRARX,SONDEGATE,TCPIP,qAR,OK1SLM-15:!5045.51N/01518.24E`radiosonde_auto_rx SondeGate v1.3.1 !w!R!

2020-05-23 11:02:56,236 INFO:Scanner #00000002 - Running frequency scan. 2020-05-23 11:03:16,362 INFO:Scanner #00000002 - Detected peaks on 19 frequencies (MHz): [ 403.2 401.65 405.5 402.46 401.93 401.49 400.87 405.58 405.64 401. 401.61 405.88 400.69 401.55 404.9 404.23 404.97 403.19 404.84] Traceback (most recent call last): File "/usr/lib/python2.7/SocketServer.py", line 596, in process_request_thread self.finish_request(request, client_address) File "/usr/lib/python2.7/SocketServer.py", line 331, in finish_request self.RequestHandlerClass(request, client_address, self) File "/usr/lib/python2.7/SocketServer.py", line 654, in init self.finish() File "/usr/lib/python2.7/SocketServer.py", line 713, in finish self.wfile.close() File "/usr/lib/python2.7/socket.py", line 283, in close self.flush() File "/usr/lib/python2.7/socket.py", line 307, in flush self._sock.sendall(view[write_offset:write_offset+buffer_size])

Hi, It's a problem or should I ignore it.

[filipsPL]

Are you intended to run radiosonde in a background? If no, remove the radiosonde fragment from your config file.

[OK1SLM]

Yes, the radiosonde are running and I want them to run

[filipsPL]

Does radiosonde itself runs without problems?

[OK1SLM]

2020-05-26 16:51:13,294 INFO:Scanner #00000004 - Detected peaks on 6 frequencies (MHz): [ 403.2 401.65 401.19 401.3 401.93 405.49] 2020-05-26 16:52:28,216 INFO:Scanner #00000004 - Running frequency scan. 2020-05-26 16:53:28,256 CRITICAL:Scanner #00000004 - rtl_power call failed with return code 137. 2020-05-26 16:53:28,258 CRITICAL:Scanner #00000004 - rtl_power reported error: Found 3 device(s): 0: Realtek, RTL2838UHIDIR, SN: 00000003 1: Realtek, RTL2838UHIDIR, SN: 00000004 2: Realtek, RTL2838UHIDIR, SN: 00000002

Using device 1: Generic RTL2832U OEM Number of frequency hops: 3 Dongle bandwidth: 2479166Hz Downsampling by: 1x Cropping by: 20.00% Total FFT bins: 12288 Logged FFT bins: 9830 FFT bin size: 605.27Hz Buffer size: 16384 bytes (3.30ms) Reporting every 20 seconds Found Rafael Micro R820T tuner Tuner gain set to automatic. Exact sample rate is: 2479166.000334 Hz [R82XX] PLL not locked! Signal caught, finishing scan pass. Killed

2020-05-26 16:53:28,260 WARNING:Scanner #00000004 - RTLSDR produced no output... resetting and retrying. 2020-05-26 16:53:28,823 INFO:RTLSDR - Attempting to reset: /dev/bus/usb/001/006 2020-05-26 16:53:39,068 INFO:Scanner #00000004 - Running frequency scan. 2020-05-26 16:53:59,384 INFO:Scanner #00000004 - Detected peaks on 10 frequencies (MHz): [ 403.2 401.65 401.19 401.12 401.2 401.17 401.23 401.24 401.18

Sometimes it crashes but restarts itself.

[filipsPL]

Sometimes it crashes but restarts itself

So, if it runs and everything works well, then don't worry!