bladeRF
bladeRF copied to clipboard
Nuand
bladeRF USB 3.0 Superspeed Software Defined Radio Source Code
When attempting to correct for LO leakage on our bladeRF mini, I noticed that the correction settings seem to have no effect. This PR hopefully fixes that...
The issue mentioned in https://nuand.com/forums/viewtopic.php?t=3792 was apparently never created, so I'll do it now - the only test using BLADERF_META_STATUS_UNDERRUN is the digital loopback test, so as far as I...
Hi BladeRF I am using the BladeRF A9 to collect signals using both RX1 and RX2. I tried to modify the code of load_sc16q11 to load two channels, but there...
hello I've recently got my hands on the BladeRF and being new I don't know anything about it. I've noticed 4 lights on it that blink with some pattern. could...
The current bladeRF driver / FPGA code doesn't prevent or detect overflow of the 12-bit ADC. The 12-bit DAC seems to accepts the range [-2048, +2047], and the current driver/FPGA...
Hi. I am using BladeRF via Python but each time I try reading RX1 continuously I get this error after some time spent: [ERROR @ host/libraries/libbladeRF/src/backend/usb/libusb.c:1071] Hit stall for buffer...
Hi, I'm using bladeRF xA9 to transmit and receive using GNU Radio 3.8 but when I change the gain in the Osmocom blocks there is no change in the plots....
I'm using bladeRF 2.0 micro xA5 and I'm trying to set the bladeRF value to a specific frequency but when I reopen it, it goes back to the defualt frequency....
Hello, I've been attempting to enable my BT-200 bias tee when using the bladeRF with srsRAN (more specifically, srsUE). As per [this](https://nuand.com/forums/viewtopic.php?t=9863) post, I have created a `bladeRF.conf` file with...
