bladeRF
bladeRF copied to clipboard
bladeRF USB 3.0 Superspeed Software Defined Radio Source Code
The installer for release 2023.02 (https://github.com/Nuand/bladeRF/releases/tag/2023.02) cannot yet be downloaded at https://www.nuand.com/win_installers/
first time I ran into this issue: any ideas on causes? BladeRF microxA4 on Ubuntu 23.04 gnuradio 3.10.5.1 bladeRF-cli version: 1.9.0-git-368f0ac9 libbladeRF version: 2.5.0-git-368f0ac9 Firmware version: 2.4.0-git-a3d5c55f FPGA version: 0.15.0...
Hi! I am experimenting with OFDM on a bladeRF 2.0 xA5 and a 2.0 xA4. This is a 20MHz LTE signal at 770 MHz with maximum tx gain. ![20M_SDR_blade_rf_0 77](https://github.com/Nuand/bladeRF/assets/30006503/554fccb3-4a41-4cf6-9031-9dd0c40bf9e3)...
hello I'm using bladeRF-cli and i'm trying to set the bladeRF sample rate to 61.44M in both RX channels. I'm executing the following script `set frequency rx1 2.45G set frequency...
``` gps-sdr-sim# bladeRF-cli -s bladerf.script Error (bladerf.script:0): An unexpected error occurred gps-sdr-sim# bladeRF-cli -i bladeRF> version bladeRF-cli version: 1.9.0-git-2b90ed39 libbladeRF version: 2.5.0-git-2b90ed39 Firmware version: 2.4.0-git-a3d5c55f FPGA version: 0.14.0 (configured from...
Link time optimization is increasingly common across linux distros, but this fails to build on gentoo when lto is enabled. I would expect this is easy to replicate with `CFLAGS=-flto...
Hi, I've seen that the sampling rate for the BladeRF xA4 is 61.44 MHz. When I activate two ports using python I've seen that each Rx has 30.72 MHz. Is...
i try to update code for using sample rate = 122.88Mhz but i have issues so Could you please update python code and make it available for the public. Thank...
I have been trying to get time synchronized output from 2x BladeRF 2.0 micros xA4 using trigger functionality but there is a random delay in samples between both streams. My...
Hi I found that my bladerf ax9 TX1 and TX2 ports are different. On TX2 I can transmit signal without extending antenna or increasing RF gain but on TX1 same...