Ninja1283

> We no longer require secrets to be stored in the config, as long as you're using the MQTT broker within Home Assistant. Does that solve this need for you?...

Same issue here with three brand new v4 boards. I couldn't even get to the WiFiManager page to connect the board to my AP before a reboot event. My previous...

> HI, did you read the issue in #2189 ? There was a broken unit, did you test only one or all.? > > Br .Frank I did read that...

[2022-12-5_FCC-2AQA6-H5054_unknown.zip](https://github.com/merbanan/rtl_433/files/10153409/2022-12-5_FCC-2AQA6-H5054_unknown.zip) I believe g004 should represent a button press, and g008 an alarm event. [2022-12-5_FCC-2AQA6-H5054_known.zip](https://github.com/merbanan/rtl_433/files/10153414/2022-12-5_FCC-2AQA6-H5054_known.zip) Versus the g011 for button press and g012 for alarm event on a module that...

I did. Signal was a bit cleaner, but still not registering correctly. [433_89MHz.zip](https://github.com/merbanan/rtl_433/files/10181031/433_89MHz.zip) Oddly enough, during some of my testing, two of the five sensors did somewhat correctly register: ```...

Proxmox VM on a Lenovo machine.