ethersweep
ethersweep copied to clipboard
Neumi
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
Hi , Thanks a lot for making this project available to all of us ,indeed quite a lot of handwork goes in making such projects , and any such work...
Can you kindly add release versions so one would know if that is still beta (0.1.0) or actually released (1.0.0) and start using it. Thanks for the project !
**Note:** This is purely an enhancement Idea. **Idea:** In my opinion the addition of a second RJ-45 port, along with the necessary switch on the PCB - or an Additional...
Use NTP (or similar) synchronized time to run actions at before defined time points.
I just saw the youtube video you posted and it looks like you've made a lot of good progress on this project. I decided to check out your schematic/layout and...
Hi! Love the project. I saw some comments on the YouTube video which included your view on EtherCAT as > EtherCAT is closed source. You have to buy the IC/ASIC...
has higher output current and voltage, very compatible to tmc2209
Quick look through the schematic I noticed your voltage reading assumes a 3.3V ADC reference voltage. Just be aware that your ADC measurements are then limited to the accuracy of...
Hi, I've been really struggling to get this to work. I've got the hardware built at JLCPCB. I've built five of them to ensure it wasn't a hardware problem. Initially...
