MotoMaxis

I guess you will have to do major work with rewriting display driver and recompile source.

I believe you would have to recompile the firmware but first have to edit the offsets somewhere in configs. I don't have experience exactly how.

Yes, this firmware takes up 2 slots. You can try loading to 3rd and 4th slot. Also, if you have hw 2.81+ and use the custom FPGA code, then the...

The minidso.com is the manufacturer. They have their own firmware that was terrible and gotten better some. Lots of reviews are based on OE firmware. Few show real capabilities of...

[281logo.zip](https://github.com/jelinj8/dso203/files/4467183/281logo.zip) Try this logo

As far as I you you should be using WC5.6 for hw2.72 and older. WC6.5 is for hw2.8x. In your case the .ADR might be different depending on memory mapping.

For hw2.72 logo's home is at 0x0803D800. This should work. [272logo.zip](https://github.com/jelinj8/dso203/files/4470928/272logo.zip)

If you are loading .bin file, you first must copy over .adr file for it which turns to .set, after copy .bin file.

Share the files or link, I will check.

@Turro75, I don't have a hw 2.72 8mb device so unfortunately I can't test. Reading the User Guides section for older HW 2.6 and 2.72 it says: `ALTERBIOS V 0.4...