MikeBP13
MikeBP13
Please see the attached screenshot:  This is from Home Assistant. The first section shows some endpoints (in this case 2). This is covered by the examples posted. The second...
Yes, the screenshot is taken from my HA (Home Assistant) configuration. The device is a [Sonoff SNZB-06P](https://sonoff.tech/product/gateway-and-sensors/snzb-06p/) presence detection sensor. The entities shown under the Sensors category are 2 endpoints...
The device diagnostic data for the SNZB-06P: [zha-0599336f21fabc2115916b60ef516cd6-SONOFF SNZB-06P-66f2ebdd4d537489bcb7f6f11824bd3f.json](https://github.com/user-attachments/files/19604927/zha-0599336f21fabc2115916b60ef516cd6-SONOFF.SNZB-06P-66f2ebdd4d537489bcb7f6f11824bd3f.json)
> also the same problem. It took 4GB of RAM. Rebooting HA does not work, you need to reboot the entire addon to clear the memory. Every day takes away...
It's getting worse: editing 4 files from config directory, the addon used memory reached 25% of 16GB...
The issue is not solved. I'm using the latest version and the high memory consumption still persists.
I have to manually restart the add-on after I finish editing my files, but this is not a fix. Having an automation to do that is nice, but it's just...
I've got the same 0V report once after turning the switch off, then on again...
I have configured a second S60TPF and this one reports 0V several times per day. No other obvious issues...