MikeBP13
MikeBP13
If the relay is turned on, there are no reports of 0V (24+h). As soon as the device is turned off, while still plugged in the mains outlet (and receiving...
I'm getting the same error as OP with esphome 2025.5.2 on the same type of device (different configuration).
Does the 2025.6.0 version fix anything? Thanks.
The issue is still present in esphome 2025.6.0.
With esphome 2025.6.0, the PMS5003 stopped sending values out of the sudden on 3 identical devices (same HW, same config). One of the devices resumed after 7h, while the other...
After several hours of testing after a clean restart, the behavior of the sensors is erratic. Sometimes data is sent (the absolute values doesn't seem to be correct) and sometimes...
> Pls test this PR if this fix the problem. [esphome/esphome#8989](https://github.com/esphome/esphome/pull/8989) Now, I've switched to this implementation. Will test in the following hours to see if it works.
> > Pls test this PR if this fix the problem. [esphome/esphome#8989](https://github.com/esphome/esphome/pull/8989) > > Now, I've switched to this implementation. Will test in the following hours to see if it...
Both the PR, as well as the official implementation (as of esphome 2025.6.x) do not work as expected. The configured update interval of 30s is not respected (sometimes the sensor...
Any updates?