MadTooler

Change item/variable name or new not popping up

7

When using the current ready to run windows version on Win 7 64, the popup window normally seen in blockly, or the ability to type over the label of the...

Servo Pins, need more

2

The servo motor module is limited in the pins you can choose. The servo library allows for almost all of the pins, including the analog, to be used for servos....

Web host/run full option

3

Carlos, Is it, or will it be possible to run from a www site, as with your demo, and have the local server finishing the connection to the IDE in...

Encoder position feedback

4

I recently found your control system while looking for encoder feedback with an esp32 based gcode system. I am very impressed. (https://github.com/bdring/Grbl_Esp32/issues/330#issuecomment-587589644) The post that lead me here mentioned was...

### Version 2.0.11 ### Hardware / Firmware GrblHAL ### What happened Running a raspberry pi 4b with Eviciv 7" multi-touch HDMI screen with usb for touch input. Rpi OS 32bit...

Install for CLI on RPI

5

I would like to run the CLI on a raspberry pi 4b running Pi OS 64bit. Is there any documentation of the installation of svg2gcode for this purpose? For running...

XY Precision setting

1

While I have had very good and smooth running results with different controllers running the svg2gcode output, I find the 13 or so decimal places of mm a bit excessive....

Do you have any plans to implement slave mode functions or know a library that has it already? Thanks

getting bounding box of transformed element

4

Hello again. I am trying to get the bounding box size of an element (path type) that my dashboard interface is transforming per user input. It needs to be message...

bbox only returns 0 for path

4

I am hacking away at getting svgdom and svg.js to work within the Node-Red environment. The bbox() does not like to return any values besides zero. Same with center and...