Mario Basz

Compatible with BCNC

2

Is there intention to make G2 Core work in BCN? I find it useful BCNC platform, in fact I make some small contributions, and specifically I would like to take...

Jerk control

1

Intention to implement acceleration profile in S? I usually machine using a trochoidal strategy, so I suspect that jerk control will allow running at higher speed / acceleration. In the...

SAM3X8E Ethernet

1

Is it possible to connect grblHal with the Arduino Due board via Ethernet, and improve electrical noise problems? Ethernet is not in the SAM3X folder. Is Bluetooth a good option...

Jerk Control

16

Could you implement jerk control or some jerk relief by adding some intermediate point (or more) in the trapezoidal profile of acceleration? I think something like acceleration is a part...

Add LPC4300 Controller

1

Is it possible to add NXP L4300 as another controller? It may be interesting to use the CIAA (Argentine Open Industrial Computer), designed to be used in industrial environments, open...

Customizable button. How to update variable value?

1

I want to perform the z probe: 1- go to the probe location in G53 2- Z probe at speed 1200 3- raise 3 mm 4- Z probe at speed...

At some point the garc definition was modified: before it allowed the use of radio, now it does not. The previous version allows greater flexibility, and with it I can...

Offset utility problem

1

 I like offset. However, if I want to make successive or pocket passes, it does not generate the correct sequence, but interleaved ones; I share image.

Involute gear, internal gear

14

Great job. But you have to correct the shape in the internal gear: what points to the center must point to the outside, what points to the outside must point...

Error calculating the minimum distance from arc to point

2

Will I be wrong? distance (self,P) for CW and CCW generates the wrong distance to a point: it takes as reference for the calculation A or B of the vector.