Mario Basz

Depending on the shape, bit and stepover, pocket generates a problem (does it go into loop?) Example with bit = 4.00 stepover = 40%, there is a problem [POCKET ERRORS.txt](https://github.com/vlachoudis/bCNC/files/10527228/POCKET.ERRORS.txt)

If you select more than one block, pocketing is done in the wrong block (it is more evident if you select 3 blocks, or more). I was trying to fix...

Milling with 3 bits

2

I John, here I show you what I have done using 3 bits: 0.10 - 0.7 - 3.0 and here I have implemented: I have run pcb gcode 3 times,...

Pocket closes the program

5

According to the figure, the diameter of the cutter and the stepover, pocket closes the program. Will it go into loop? Problem with the last level of pocket? When modifying...

Danger: If work is interrupted, restart in G54

1

If I stop to interrupt the work, or if finished the job, you start at G54 instead of maintaining the work site. While working on G53 and interrupting to correct...

Is it possible to make bCNC work on .otf fonts?. Thanks

The difference complement sometimes produces incorrect results. In this example, the error is generated by the position of the blocks relative to each other: 1 - block (island) with SQUARE...

Milling with two tools of different diameters (useful for PCBs)

4

My idea for a milling suite with two tools of different diameters, starting from the original path (or the smaller cutter pass), seems to be working correctly: For the larger...