Lazarica
Lazarica
Well that is exactly what it should do: to get families by a specific category that are nested inside a family. 😄 It's mostly for filtering the nested families that...
This was surprisingly fast! Thank you for adding the extra nodes! 👍 😄
Yeah, I can imagine 😆 .. you fix one thing, and 10 more show up
Great 👍 Thank you for the heads up!
Can you share the dynamo graph file? the .dwg input file would also help
Hi, just some tips to make it run: Project file: [test_2.zip](https://github.com/Autodesk/civilconnection/files/13379520/test_2.zip) 1. Set the Geometry scaling to Medium  2. You only need the Start and End station  3....
Hi, I think the script file might be bugged (or Dynamo for Revit 2024 itself.. not sure which) Even though it says geometry scaling is set to Medium.. in reality...
This scenario were you only get lines happens due to the geometry scaling being set to large. Normally, you should be seeing the clear boundary of the assembly (closed polygons)...
Hi, your problem is related to the assembly that you have created, you have an extra link in there that should not exist :D this is why you are not...
@alitaheri93 I'm not sure I fully understood what you are trying to do, but when you are dealing with regions that have different assemblies in the same corridor you will...