Matt Harlum

I believe the folder and datacenter are case sensitive, do they match what you see in vCenter? If you have govc installed try doing a ```govc ls``` to list objects...

@anoopkbaby1 Have you configured winrm to allow connections in your autounattend.xml? A good example of how to do this is [here](https://github.com/chef/bento/blob/master/windows/answer_files/2016/Autounattend.xml) in the ```FirstLogonCommands``` section

If manual cloning works but terraform doesn't then the issue must be with the terraform config Have you specified a network_interface block in your terraform config? I don't think the...

@KiranMedicherla Which version of ESXI & vCenter are you running? Boot command typing is supported on 6.5 and newer only

Re: RAS lines it's possible I made a mistake when implementing the v2 firmware and got that backwards - I thought I tested that at the time but it's been...

The readme has always specified U7+U8 which are RAS2, RAS3 before V2 was added, so when I implemented that firmware I specified those RAS lines to match what I thought...

Yep this should work in an A600 too :)

Hi @furrtek! The logic was written based off observed behaviour and based on the pal equations from the German A2000 which was pre-Buster It's great to see the reverse engineered...

After looking for a bit I've already noticed some small differences that will be easy for me to fix, and one expected deviation that is needed due to the faster...

Hi, Looking at the manual for the Rejuvenator it may be possible to resolve this by turning off J101 & J102 which will then free up the Autoconfig address space....