Kiiiddd

- I have no idea as I am a idiot when it comes to coding, I just know I copy pasted the bed fan macro into the overrides and it...

It was the gcode_macro CLEAN_NOZZLE included in Klippain. I used the dashboard to call it without any print running and at the end it left the nozzle at the brush...

It's different now so I couldn't tell you the exact coordinates but the Z height was what mattered and that was at -0.5mm(so just below Bed height). I always seen...

It is called EDDY should be put in the next few days https://twitter.com/BigTreeTech/status/1734148535371845917 They are all the same Sensor with the BTT one being slightly unique due to the form...

Need to use M125. In prusaslicer you can change the G-Code command in the printer tab under custom G-Code and scroll down. Then replace M601 with M125 and when you...