Jordan87
Jordan87
I can confirm that i run into same issue, log looks a little bit different but i also have **%** in my files name. > 2021-12-11 16:48:28,486 - octolapse.render -...
For me this also solved my issue with rendering. Thank You
Thanks but I moved to Citroen's config https://github.com/Flodu31/HomeAssistant-PeugeotIntegration/blob/main/Citroen-ec4.md which looks better and have more features :)
I recomend to use Citroen's readme https://github.com/Flodu31/HomeAssistant-PeugeotIntegration/blob/main/Citroen-ec4.md If you are using HA with Addon like me you can try with http://homeassistant.local:5000/charge_control?vin=YOUR_VIN&percentage=70
Yes, pyserial and minimalmodbus were installed and updated, with: sudo apt-get install python-pip pip install pyserial pip install minimalmodbus
At least HomeAssistant is working fine with my SDM630 ;)
You have many videos/manuals on youtube how to install HA, for example this for RaspberryPi https://www.youtube.com/watch?v=2F_JEuOeQL4 When you will have it working you need to edit one file and create...
In HA you need to copy or create same file but change name from sdm630_registers.txt to sdm630_registers.yaml [sdm630_registers.txt](https://github.com/MFxMF/SDM630-Modbus/files/9758413/sdm630_registers.txt) This file should be in same location as configuration.yaml And in configuration.yaml...
Average emissions CO2 also? I do not see API command to add key. "You have to add an API key from https://co2signal.com/ to have your CO2 emission by KM (in...
Now i see thats the same issue for me It started yesterday around 21:37 CET time