Jordan87

Hi For me indeed "Battery voltage" seems to be 12V main battery charge level. with Range 0-400 (0,25% resolution) where 400 is 100%, 0 is most probably 0% :) Yestarday...

Ohh, you are correct, now I see that it is not directly from psacc but was created base on https://github.com/Flodu31/HomeAssistant-PeugeotIntegration I should correct this one. ` 308_battery_voltage: friendly_name: "Battery Voltage"...

Im sure its not about volts but % level of charge 12V battery. 400V was in my case ~13.2V but 200V was around 11,8V With volts this cant be 50%...

Here you can see my graphs even with exact spots (dips in voltage) when car was woke up. 200V= 11.8V 

You have low battery level in your multimeter. This could cause incorrect value for voltage measurment. It may be that you are reading different value with that OBD device (at...

Im my case SOH is 16%, i don't think its in percent, maybe resistance in ohm  

Maybe limitation is only needed for printing via octoprint, same name from SD was working. ;)

> > > @Jordan87 Can you try reprinting the initial long filename using Octoprint and setting the Ignore warning option as described in https://github.com/mriscoc/Marlin_Ender3v2/wiki/Octoprint#error-handling As I understand this will only...

Hi Sorry for late response. This should be enough :) The best would be to have some notification during sending file to octopi with button "Print with OctoPrint" but im...

Notification about exceeded name limit in your plugin will make us aware that we will lost some info from file name. Notification and possibility to modify [base_name] would be ideal...