Jdaie
Jdaie
Please try these commands to start/stop pisugar-server: #### reload daemon sudo systemctl daemon-reload #### check status sudo systemctl status pisugar-server #### start service sudo systemctl start pisugar-server #### stop service...
I need to see what happened in the detail log. Try this command: journalctl -u pisugar-server ------------------ Original ------------------ From: Jason Ting
Please try install with bash `curl http://cdn.pisugar.com/release/Pisugar-power-manager.sh | sudo bash`
Hi, sure you can use a 3.7v 10000mAh lithium battery to connect to PiSugar 2 Pro thought PH2.0. But using two battery packs in parallel is not suggested. Since the...
We will use an MCU with temperature monitoring in the next version. But it just monitors the chip itself. Monitoring battery temperature requires lithium battery with NTC feature, which it...
Hi [fheslouin](https://github.com/fheslouin), we didn't test it on other boards. It should be ok if the GPIO is compatible. But there might be some differences on driver or i2c bus index,...
The small round button on Pisugar3 is for reset. It seems abnormal if you have to press it before power up. Please contact our product support email for more detail....
可以使用其他平台交叉编译，把可执行文件拷到zero上跑