JacoboSanchez

Energy dashboard uses energy (kwh) and sensor.sun2000_6ktl is a power sensor (W), that is why it gets not listed as an option. Energy dashboard would never give you the instant...

Yes, daily or total yield should work. My advice is to use total as daily resets to 0 at midnight but may give you issues if the system time between...

For reference [another post](https://github.com/Emilv2/huawei_solar/issues/56#issuecomment-986593041) for a similar question where you can see some cards to have a power flow diagram in a dashboard (not the energy one from HA)

Yes there are many values obtained from the inverter to the integration but most of them are attributes of the entitty, not sensors. You must define a sensor template at...

You did not show the values you get for that instant. While using batteries the data provided by the inverter is less straightforward so you would need to figure out...

You have to be clear and provide examples to help others understand what you are asking for. If I didn't post examples of configuration from what I was explaining probably...

I have not time to check the excel at this moment but I can confirm you that Fusion app does have a 5minutes update time while the home assistant does...

Check [this comment](https://github.com/Emilv2/huawei_solar/issues/53#issuecomment-983862230) in other thread EDIT: Both daily_yield or total_yield can be used but daily_yield may have some issues on the daily reset time if system time is not...

If you read the grid consumption value, it is in the "Electricity grid" section. That does not refer to your house consumption but the energy imported from the grid. I...

Energy is an cumulative value, not instant power like W. And those are total energy values so at the time of setting it HA initializes the increment from 0 to...