JacoboSanchez

Do you know if the modbus-tcp configuration requires an installer account?

Anyone has the apk for the fusion solar android app that works with the 113 firmware? I don't want to upgrade but now I can not connect with the app

I can make a test if you want. I don't know much about modbus, tried the following in a simple client trying to set discharge cutoff to 13% (looking at...

Tried with a modbus client gui and it seems that the error obtained is related to the lack of privileges 

I think you are using the wrong value then. From my understanding input power attribute is the DC current being produced as solar power. Entity value is the active power...

Well I also explained that and It and posted energy/ power/attributes/entities. It is also under the integration README. storage_charge_discharge_power is not an attribute but a separate entity. It takes negative/positive...

Home assistant energy panel is meant to work with energy (KWh). If you want to have power flows in W (for kW you should create templates dividing by 1000) you...

Hacs does not have an option to specify versión afaik. However you can make a fork of this project, reset It to the desired versión and remove EmilV2 integration and...

Data obtained from this integration is the one provided by the inverter reading modbus tcp registers. You can find their definition in the [Modbus Interface Definitions](https://github.com/Emilv2/huawei_solar/files/6792170/Solar.Inverter.Modbus.Interface.Definitions.pdf) document. There is no...

Don't know if it was casual or not, but after some tests downloading (not using as they do not work with huawey) other modbus integration (SAJ Inverter Modbus) this integration...