Hwerow
Hwerow
Thanks, I will give it a go once the current brew is done.
Yes, I am aware that if you change the address on the OLED but it is very fiddly. I thought that the fifth line on the OLED was used for...
https://randomnerdtutorials.com/esp32-weather-station-pcb/ This project uses one SSD1306 and uses multiple screens that advance every 15 secs or by button push. This might be a more elegant solution than having multiple OLED...
So it would seem that using a second OLED for the pressure information would be the simplest approach and the first OLED keeps the original BrewPi functionality with the rotary...
Sounds promising. If I understand correctly. Just the one OLED with different screens displayed with a configurable timer or by turning the rotary encoder. One of these screens could show...
Interesting, I have had a similar issue with ESP32 stopping sending data to Brewfather (set for 15 minute intervals). I thought that it may have been a power spike or...
Well my ESP32 with version 4.1 connects OK and maintains its connection (currently over 6 hours) on the current batch - it renders the Mode Beer Temp etc OK and...
Small point GPIO19 is used for Capping
Re the capping I guess I was too brief in my comment. It would have better read "What about the Capping?" which you have covered above. Cheers
Hi Vito, Over the last few weeks I have been trying to get the TFT display to work with ESP32 and BPL. I used 4.2pre downloaded 8 Jan 2022 with...