Hitayukta

This is the output of the below command: can.detect_available_configs(interfaces=["vector"]) [{'interface': 'vector', 'channel': 4, 'serial': 2483, 'hw_type': , 'hw_index': 0, 'hw_channel': 4, 'supports_fd': True, 'vector_channel_config': VectorChannelConfig(name='VN5620 Channel 5', hw_type=, hw_index=0, hw_channel=4,...

Hello, Thanks for the feedback, I did not understand your solution. Sorry. I want to transmit and receive some data on this and be able to see the CAN bits...

Does not work, sorry Screenshot : [Error_Screenshot](https://pasteboard.co/1SmU5qzG85bO.png) Edit: I tried with all channels, none of them are working :(

Yes, it was connected during the last test. The Canoe was running. I always run the Canoe and execute these scripts. Pardon me, I am new to this and do...

It's a remote setup located outside my scope. However we can still debug. Will post screenshots next week. Thanks a lot for support.

@zariiii9003 - I think I understood the problem. This is my can.conf file.  I created a python-can application in vector hardware config and assigned CAN1 to it. Below screenshot....