GregValiant

I have had to do this on occasion. If it is a single feature then adjusting the "Initial Layer Height" can resolve the problem. That can also be done when...

Thanks for the report. I would suggest you move from the 5.6 beta pre-release version, to the current 5.7.2 stable version of Cura. I didn't have any trouble installing the...

@HellAholic have you seen this one?

I'm not sure I understand. Can't this be done in the StartUp Gcode now? M140 S{material_bed_temperature_layer_0} ; Start the bed heater M109 S{material_print_temperature_layer_0} ; Start the hot end heater and...

Thanks for the report. The slicing bar did hang up on around 25% to 30% for a long time (in fact it was taking so long that I went to...

The crash when trying to show the first layer preview is a different problem and is likely either a video driver compatibility problem, or a problem with the way Cura...

The current "Monitor" tab is to provide USB printing functionality to the early UltiMaker printers that require it (no SD card slot). Because of that it probably won't be changed....

Thanks for the report. Both "Initial Printing Temperature" and "Final Printing Temperature" are used by multi-extruder printers. You are correct that they have no effect on your single extruder machine....

Thanks for the report. This may be related to #19445 . There are two models (original stl(3) and original stl(4)) that simply will not sit flat on the build plate....

This is making my head hurt. Going a bit of a different way and using Mesh Tools "Reset all Model Transformations" and then creating a new project file appears to...