GregValiant

I generated my own version of the model and I can't fix this. I got it back to where with Wall Count at 2 it seems to work but when...

Model errors are things like flipped normals or open seams (non-manifold). There are some that Cura can catch and others that are only apparent in the slice preview (internal extra...

That's the model I mocked up. It's a "representation" and it's a good one as it doesn't work either. I can get combing to work a little bit when I...

I lubed the lead screw with "real" high-moly machine grease and printed an extensible cover that collapses as the Z rises. The cover keeps the dust and debris off. Wear...

Here. You get to be a lab rat. Unzip the folder and copy "AlterZhops.py" to "C:\Program Files\UltiMaker Cura 5.3.0\share\cura\plugins\PostProcessingPlugin\scripts" It will be available in Cura under "Extensions/Post Processors/Modifiy Gcode" and...

The plugin sets the Z hop height to what you enter in the plugin setting and for the layer range you select. So you must have Z-hops enabled in Cura...

It was this model that got me to thinking.  When the horizontal hole was closing up - the feather edges warped upward and caused the nozzle to really smack...

Yes, it works with everything from 4.13.1 up to 5.8.0. There isn't anything "version specific" in it. The Cura team was busy with other things and new post-processors have not...

Since you folks have seemed interested I have put together another Z-hop script "Z-hops for Travel Moves".  It is independent of the Cura settings so you can have Z-hops...

I decided not to submit "AlterZHops" and went with "ZHopOnTravel" instead. The difference between the two is that AlterZhops acted on Zhops that were inserted by Cura. ZHopOnTravel does not...